The URL can be used to link to this page

Home My WebLink AboutTracJack Modules Pagel of 2 L oRor+rlcs QLL C��< 125 Eugene O'Neil Drive I New London,Cr 063201 Phone:860-445-3800 I Fmc:86OA05-2970 Workstation Part Number: OR-63700005 Description:TracJack USOC six-position - RJ25C WON b �I ) O q i TracJack Module provides a single RJ25C six-position jack.TracJack is a versatile single jack solution in a front-load footprint which allows a choice of up to six jacks/connectors to fit in a single gang plate Specifications Category Performance/Application USOC six-position Footprint TracJack Color Fog White Number of Ports 1-port Labeling 8 Identification YES Height .92"(23.37 mm) Width .73"(18.54 mm) Depth 1.34"(34.04 mm) UL Listing No. E131600 UL Standard UL 1863 CUL Standard UL 1863 CUL Listing No. E131600 FCC Standard Part 68 Product Type or Accessory Modular Jack Construction Material Finish/Plating Plastic Series II Housing High Impact Thermoplastic ABS 94V-0 Nickel plating and a minimum of 50 micro Array of six linear modular contacts Phosphor bronze inches of selective gold plating in contact area IDC contacts, 110 D2 Phosphor bronze Nickel plating and tin lead over plate Printed circuit board Two-sided FR-4 epoxy resin/glass base with solder mask Features Benefits • Front removable • Less intrusive access for adds,moves,changes • Traditional 110 termination • Standard termination practices • Standard TracJack footprint • Fits in all TracJack faceplates and housings • Icon compatible,with Category 5e marking on jack • Supports 606 designation requirements face http://ortronics.smartcats.com/ortronics/sc_app/sc_specsheet.asp?famID=1010&vid=O,0,0,0... 4/7/2004 Page 1 of 2 r ORTRONICS 125 Eugene O'Neil Drive New London,CT 063201 Phone:860-445-3800 Fax:860-405-29M I Workstation Part Number: OR-TJ5E00 Description:Clarity5E TracJack, T568A/B,180° ClaritySE TracJack,ETL verified to TIA Category 5e component specification.Front-loading and front removable.New universal T568A/B wiring label and tapered wiring towers simplify termination.Center tuned to ClaritySE patch cords for significant performance above Category 5e Specifications Category Performance/Application Category 5e/UTP Footprint TracJack Wiring Scheme T568 A/B Color Fog White Labeling 8 Identification YES Height .92"(23.37 mm) Width .73"(18.54 mm) Depth 1.06"(26.92 mm) Wire Gauge 22-26 AWG UL Listing No. E131600 UL Standard UL 1863 CUL Standard UL 1863 CUL Listing No. E131600 FCC Standard Part 68 ETL Listing No. 3013270-003 ETL Standard,Tested To TIA/EIA:568:6 2 Category 5e Product Type or Accessory Clarity5E Jack Construction Material Finish/Plating Plastic TracJack Housing High Impact Thermoplastic ABS 94V-0 Array of eight modular contacts Nickel plating and a minimum of 50 micro (staggered) Phosphor bronze inches of selective gold plating in contact area IDC contacts(Low noise) Phosphor bronze Nickel plating and tin lead over plate Printed circuit board Two-sided FR-4 epoxy resin/glass base with solder mask Features Benefits • ETL Verified to Category 5e component standard • Ensures standards compliance http://ortronics.smartcats.com/ortronics/sc_app/sc_specsheet.asp?famID=1010&vid=0,0,0,0... 4/5/2004 Page 2 of 2 1 • Center tuned design • Transparent interface with Clahty5E cords • Easy lace IDC housing • Reduces wiring time • Easy to follow universal wiring label • Quick,user-friendly,eliminates confusion • Front removable • Less intrusive access for adds,moves,changes • Standard TracJack footprint • Fits in all TracJack faceplates and housings • Icon compatible,with 5E Marking on jack face • Supports 606 designation requirements ©Ortronics,2003 http://ortronics.smartcats.com/ortronics/sc_app/sc_specsheet.asp?famID=1010&vid=0,0,0,0... 4/5/2004 Page 1 of 1 ORMONI CS 125 Eugene O'Neil Drive New London,CT 063201 Phone:860-445-3800 Fax:860-405-2970 Workstation Part Number: OR-63700006 Description:TracJack Module F Connector F/F Ir Trac.lack Module provides a single F-connector coupler F/F with under.2dB of insertion loss at 2GHz(1/3 the loss of standard models).Trac lack is a versatile single jack solution in a front-load footprint which allows a choice of up to six jacks/connectors to fit in a single gang plate Specifications Category Performance/Application F Conn Coax Footprint TracJack Color Fog White Number of Ports 2-port Labeling&Identification YES Height .92"(23.37 mm) Width .73"(18.54 mm) Depth .57"(14.48 mm) UL Listing No. E131600 UL Standard UL 1863 CUL Standard UL 1863 CUL Listing No. E131600 Product Type or Accessory Connector Construction Material Finish/Plating Plastic Series 11 Housing High Impact Thermoplastic ABS 94V-0 F Connector female/female coupler Feed-through,RG6/59(G-F81TN) Features Benefits • F Connector coupler F/F • Quick connection for terminated CATV cables • Front removable • Less intrusive access for adds,moves,changes • Standard TracJack footprint • Fits in all TracJack faceplates and housings ©Ortronics,2003 http://ortronics.smartcats.com/ortronics/sc_app/sc_specsheet.asp?famID=1010&vid=0,0,0,0... 4/5/2004 Page 1 of 1 ORTRONI CS 125 Eugene O'Neil Drove I New London,CT 063201 Phone:860-445-3800 1 Fax:860-405-2970 Workstation Part Number: OR-42100002 Description:TracJack Blank Modules(package s� i ^Y� rk often) of � c— Package of ten TracJack blank inserts can be used to fill unoccupied TracJack openings.These front removable blanks can be later exchanged for TracJack connectors to service future needs Specifications Footprint TracJack Color Fog White Product Type or Accessory Blank Construction Material Finish/Plating Plastic Trac lack Blank High Impact Thermoplastic ABS 94V-0 Features Benefits • Snap-in design • Quick and easy installation • Fills unoccupied Trac lack openings • Holds space for future expansion ©Ortronics,2003 http://ortronics.smartc ats.com/ortronics/sc_app/sc_specsheet.asp?famID=1010&vid=0,0,0,0... 4/5/2004 CATEGORY 5e UTP/4 PAIR HYPER PLUS 5e ► Voice and Data Applications ► Third Party Verified Berk-Tek A N E X A N 5 C O M P A N Y ' ► Riser and Plenum Rated _- __ 1. 1 _ - 'b www.berktek.com ► Limited Combustible Available S 1-800-237-5835 Berk-Tek's Hyper Plus 5e Standard Category FEATURES BENEFITS 5e UTP cables are designed for horizontal Supports 10BASE-T, 100BASE-TX, Universally accepted design for global network and voice applications in a 1000BASE-T,Token Ring, TP-PMD,Voice, commercial network installations structured cabling network to connect Multimedia, 155 Mb/s ATM Simplified structured cabling solution between the user outlet and horizontal ETL Verified to TIA/EIA-568-6.2 preserving long-term network investment cross-conned. Category 5e Warranted,trouble-free cabling installa- C O N S T R U C T I O N tion and maintenance TECHNICAL DATA—PHYSICAL 0.52 mm (24 AWG), bare copper wire insulated with polyethylene(non-plenum) CMR CMP CM(PATCH)' or FEP(plenum).Two insulated conductors (o.sz) (0.61 Conductor diameter in (mm) .020 (0.52 .024.020 twisted together to form a pair and four Cable diameter-in. nun 187 '— such pairs cabled to form the basic unit, - ( )............... -- - (4.8) 165 (4.2) 215 (ss) jacketed with flame-retardant PVC. I Nominal cable weight lb./kft.(kgtkm) 20 (30) 20 (30) 23 (34) Max.installation tension-tb,(N) 25 (110) 25 (110) 25 (110) STANDARDS Min.bend radius-in.(mm) 1.0 (25.4) 1.0 (25.4) 1.0 (25.4 _�__ 'Patch cables Olue stranded tinned copper conductors. North American ANSI/TIA/EIA-568-B.2 Category 5e and Category 5 PARAMETRIC MEASUREMENTS International ISO/IEC 11801 Category 5 European EN 50173 j HORIZONTAL PATCH Mutual Capacitance 4.6 nF/100 m nom. 5 6 nF/100 m rom. FLAME RATING --_. _ - __. DC resistance 9.38 Ohms/100 m max. 9.09 Ohms/100 m max. Non-Plenum—UL 1666,CMR,CMG,IEC 332-1 Skew 25 ns/100 m ma)L 25 ns/100 m max. Plenum—NFPA 262,CMP I Velocity of 70%nom.Non-Ptemrm 70%nom. Patch—UL 1581,CM,IEC 332-1 propagation 72%nom.Plenum Input Impedance I 100*15% 0.772-100 MHz 100 t 15% 0.772-100 MHz APPLICATIONS Berk-Tek's Hyper Plus 5e Standard Category COLOR CODE TEMPERATURE RATING 5e UTP cable is intended for high speed j Pair 1 I White/Blue t3V,e Installation 0•Cto+50•C data applications up to 100 MHz including: Pair 2 White/Drange Orange Operation -10°C to+60°C Parr 3 White/Green Green IEEE 802.3 1000BASE-T,100BASE-TX, per 4 yy /g g 10BASE-T —_.___........_--_......._..--_.___.. �� O 155 Mb/s ATM C .L ANSI X3.263 1OOMb/s 4/16 Mb/s Token Ring Corporate Headquarters:132 White Oak Road,New Holland,PA 17557 USA Canada Sales Office:140 Allstate Parkway,Markham,Ontario BR OV Canada CATEGORY I CONDUCTOR INSULATION Voice and Data Applications .........._.. ......._-_.-.. ...._..................-....... RIPCORD y _� Third Party Verified er Te A N E Y A N $ t_G M P A Y Y Riser and Plenum Rated !',�; -....................__. __- E www.berktek.com JACKET ► Limited Combustible available 1-800-237-5835 T E C H N I CAL D AT A-E L E C T R I CAL (Patch cable values appear in parentheses) i HORIZONTAL j INSERTION LOSS FREQUENCY RL Attenuation PS-NEXT NEXT ACR PS-ACR ELFFXT PSELFEXT (dB) (Attenuation (de)(dB) (dB) (dB) (0) (dB) MHz min. Mae. min. min. min. min. min, min. f ---'- --- -- 1 20.0 20.0) 2 0 (62 3 65.3-( (2 4) j 62.3 ) (65.3) 63.2 60.3 63.8 (63.9) 60.8 (60.8) ( ) ( ) (51.7) 48.7 (48.7) j 4 23.0 (23.0) 4.1 (4.9) 53.2 53.2 56.2 56.2 52.1 49.1 51.7 IF 10 25.0 (25.0) 6.5 (7.8) 47.3 (47 3) 50.3 (50.3) 43 8 40.8 43.8 (43 8) 40 8 (40.8) _................---....-._...._....... ...--. --. 16 25.0 (25.0) 8.2 (9.8) 1 44.2 (44.2) 47.2 (47.2) 39.0 36.0 39.7 (39.7) } 36.6 (36.6) 20 25.0 (25.0) 9.3 (11.1) 42.7 (42.7) 45.7 (45.7) 36.4 33.4 1 37.7 (37.7) 34.7 (34.7) 31.25 23.6 (23.6) 11.7 (14.1) 39.8 (39.8) 42.8 (42.8) 31.1 28.1 33.9 (33.9) 30.9 (30.9) 62.5 21.5 (21.5) 17.0 (20.4) 35.3 (35.3) 38.3 (38.3) 21.3 18.3 27.8 (27.8) 24.8 (24.8) 100 20.1 (20.1) 22.0 (26.4) 32.3 (32.3) 35.3 (35.3) 13.3 - - 10.3 -- 23_8 (23.8) 1 20.8 (20.8) IMPOR W:Berk-Tek performance guarantees are based on swept-frequency testing and apply to all hequencies for the entire specified frequency range and are not limited to the tables of data shorn which are presented to demonstrate our guarantees at-representative-frequencies. PART NUMBERS-STANDARD CATEGORY 5e UTP M06 PAIRS PART NUMBER JACW FLAME RATING JACKET COLOR 4 10032510 PVC CMR Riser Gray 4 10032528 PVC - CMR Riser ---- Blue 4 10032531 PVC CMR Riser Yellow 4 10032535 PVC CMR Riser White 4 10032539 PVC {'- CMR Riser Green 4 10032706 PVC - CM Patch Black 4 10032708 PVC CM Patch - -- Red 4 10032710 PVC CM Patch Green ----- --- ---- --- --- - --- --.... --�-------------- ---- ----- 4 10032712 PVC cm Patch Ydiow 4 1O032714 PVC CM Patch Blue 4 10032715 PVC CM Patch(Reef)-- j Violet 4 10032717 - -- --- PVC- --- CM Patch White 10032719 -._._.__._-_...... PVC- - -- --.t...............__..._..... CM Patch ---- - ----...._........ Pvc 4_ .- ---- ------ 10032207. _..... ...._---.... .. A11._.. CMPP4num .---- j-- G 4 10032223 PVC Alloy _ CMP Plenum White 4 10032227 PVC Alloy_- -- CMP Plenum Blue 4 20032232 _PVC AU r CMP Plenum i Green < 10032235 PVC Alloy CMP Plenum Yellow 4 10034866 FEP Limited CombustiN.- Clear NOTE Standard Lengths:1,000 feet(305 meters.)Specifications subject to change without notice.Part numbers shown are for Tek-Pak boxes. Also available on reels or ReeFft reel-in-a-box.limited Combustible version also available.Other jacket colors available. Corporate Headquarters: 132 White Oak Road,New Holland, PA 17557 USA Canada Sales Office:140 Allstate Parkway,Markham,Ontario L3R CD Canada ti�PERPLUS5e1)S Clr14 Page 1 of 2 > �CRTRONICS 125 Eugene O'Neil Drive I New London,CT 063201 Phone:860-445-3800 Fax:860-405-29M Workstation Part Number: OR-40300548 ,'"1 Description:TracJack Faceplate,two-port(single gang),plastic , Ortronics Single Gang Plastic Faceplates accept front-loading TracJack modules and include two snap-in label fields Specifications Category Performance/Application Single gang Footprint Trac,lack Color Fog White Number of Ports 2-port Labeling&Identification YES Height 4.5"(114.3 mm) Width 2.75"(69.85 mm) Depth .3"(7.62 mm) UL Listing No. E131600 UL Standard UL 1863 CUL Standard UL 1863 CUL Listing No. E131600 Product Type or Accessory Wall Plate Mounting Hardware Included #6-32*25 mm Screw,Binding Head(2 ea) Labeling Options Paper size 70400411=8.5"x 11" Label Size 1.81"x.4216" No.Labels/Sheet 96 Acceptable printers Laser sheet fed Brady Part No. LAT-176-124(2)0.375x1.901NSERT Construction Material Finish/Plating Plastic Trac,lack Faceplate High Impact Thermoplastic 94V-0 ABS/PC/BLEND Features Benefits • Low profile design • Blends with most environments • Recessed label fields • Supports TIA/EIA 606 standard • Easily accepts snap-in Trac lacks • Easily field configured http://ortronics.smartcats.com/ortronics/sc_app/sc_specsheet.asp?famID=1010&vid=0,0,0,0... 4/5/2004 Page 2 of 2 • Front-load module approach • Improves access for future work • Textured finish • Hides future scuffs • Oval mounting holes • Assists proper alignment ©Ortronics,2003 http://ortronics.smartcats.com/ortronics/sc_app/sc_specsheet.asp?famID=1010&vid=0,0,0,0... 4/5/2004 CADDY® CABLECAT - Wide Base Cable Support Page 1 of 4 CADDY® CABLECAT - Wide Base Cable Support oil ERICO offers the CADDY CABLECAT- Wide Base Cable Support. Features . Cost-effective alternative to expensive cable tray . Galvanized finish on ]-hooks provide smoother cable pull and greater corrosion resistance . Complies with UL, cUL, NEC and EIA/TIA requirements for structured cabling systems . ]-Hooks now with galvanized finish Applications . Provides proper support of Category 5, fiber optic and innerduct . Variety of sizes and designs available to attach to virtually any structure More Information http://www.erico.com/productPrint.asp?productid=1221 4/7/2004 CADDY® CABLECAT - Wide Base Cable Support Page 2 of 4 01 Fig,b F4.f F*= 0 � 4 L RG,1 M• o 3 � Fig.d o Fig. 14 Fig.15 Fig.10 FfOL 7 d� D 0 O O if Fig,f0 � a a F19 fT V �° Fig. 17 Fig 13 Fla 19 1 0�, F IV 13 � Fig f 1 of V Catalog No. Fig Description Std Box No. Qty Pre-Riveted Factory Assemblies For 3/4" Diameter Loop CAT12BC 8 Screw-on 1/8" thru 1/2" flange 40 CAT12BC200 9 Screw-on 1/8"thru 5/8" flange 40 CAT1224SM 10 Hammer-on 1/8" thru 1/4" flange 40 CAT1258SM 10 Hammer-on 5/16" thru 1/2" flange 40 CAT12912SM 10 Hammer-on 1/2" thru 3/4" flange 40 CAT1224 11 Hammer-on 1/8"thru 1/4"flange—bottom mount rotates 40 360° CAT1258 11 Hammer-on 5/8" thru 1/2" flange—bottom mount rotates 40 360° CAT12912 11 360°Hammer-on 1/2" thru 3/4" flange— bottom mount rotates 20 CAT12VF14 12 1/16" thru 1/4" vertical flange 40 CAT12AF14 13 1/6" thru 1/4" Z purlin 40 http://www.erico.com/productPn*nt.asp?productid=1221 4/7/2004 CADDY® CABLECAT - Wide Base Cable Support Page 3 of 4 CAT124Z34 14 #12 thru 1/4" wire, plain or threaded rod and 1/8"thru 60 3/8"flange CAT126Z34 14 3/8" plain or threaded rod and 3/8" thru 9/16" flange 60 CAT12CPNA 15 Longer leg Angle bracket 50 CAT12AB 15 Angle bracket 80 CAT12BCB 16 Screw-on 1/8" thru 1/2" flange—rotates 3600 40 CAT12BC200B 17 Screw-on 1/8" thru 5/8" flange—rotates 3600 40 CAT12TS 18 Acoustical tee bar 60 CAT12CDlB 19 Under floor support to pedestal 20 Catalog No. Fig Description Std Box No. Qty Pre-Riveted Factory Assemblies For 1-5/16" Diameter Loop CAT21528 7 Cable to acoustical tee bar 20 CAT21BC 8 Screw-on 1/8" thru 1/2" flange 40 CAT21BC200 9 Screw-on 1/8" thru 5/8" flange 40 CAT2124SM 10 Hammer-on 1/8"thru 1/4" flange 40 CAT2158SM 10 Hammer-on 5/16" thru 1/2" flange 40 CAT21912SM 10 Hammer-on 1/2" thru 3/4" flange 40 CAT2124 11 Hammer-on 1/8" thru 1/4"flange—rotates 3600 40 CAT2158 it Hammer-on 5/16" thru 1/2"flange— rotates 3600 40 CAT21912 11 Hammer-on 1/2" thru 3/4"flange— rotates 3600 20 CAT21VF14 12 1/16" thru 1/4" vertical flange 40 CAT21AF14 13 1/6" thru 1/4" Z purlin 40 CAT214Z34 4 #12 thru 1/4" wire, plain or threaded rod and 1/8" thru 60 3/8" flange CAT216Z34 14 3/8" plain or threaded rod and 3/8" thru 9/16" flange 60 CAT2IAB 15 Angle bracket 40 CAT21CPNA 15 Longer let Angle bracket 50 CAT21BCB 16 Screw-on 1/8" thru 1/2" flange—rotates 3600 40 CAT21BC200B 17 Screw-on 1/8" thru 5/8" flange—rotates 3600 40 CAT21CDIB 19 Under floor support to pedestal 20 Catalog No. Fig Description Std Box No. Qty *Pre-Riveted Factory Assemblies For 2" Diameter Loop CAT32528 7 Cable to acoustical tee bar 20 CAT32BC 8 Screw-on 1/8" thru 1/2" flange 40 CAT32BC200 9 Screw-on 1/8" thru 5/8" flange 20 CAT3224SM 10 Hammer-on 1/8" thru 1/4" flange 40 CAT3258SM 10 Hammer-on 5/16" thru 1/2" flange 40 http://www.erico.com/productPrint.asp?productid=1221 4/7/2004 CADDY® CABLECAT - Wide Base Cable Support Page 4 of 4 CAT32912SM 10 Hammer-on 1/2" thru 3/4" flange 40 CAT3224 11 Hammer-on 1/8" thru 1/4" flange— rotates 3600 40 CAT3258 11 Hammer-on 5/16" thru 1/2" flange—rotates 3600 20 CAT32912 11 Hammer-on 1/2" thru 3/4" flange— rotates 3600 20 CAT32VF14 12 1/16" thru 1/4" vertical flange 40 CA32AF14 13 1/6"thru 1/4" Z purlin 40 CAT324Z34 14 #12 thru 1/4" wire, plain or threaded rod and 1/8" thru 40 3/8" flange CAT326Z34 14 3/8" plain or threaded rod and 3/8" thru 9/16" flange 40 CAT32AB 15 Angle bracket 40 CAT32CPNA 15 longer leg Angle bracket 50 CAT32BCB 16 Screw-on 1/8" thru 1/2" flange —rotates 3600 20 CAT32BC200B 17 Screw-on 1/8"thru 5/8" flange— rotates 3600 20 CAT32CDlB 19 Under floor support to pedestal 20 Copyright©2004 ERICO International Corporation. http://www.erico.com/productPrint.asp?productid=1221 4/7/2004 4 1600A Series ADA Compliant Practice Emergency Phones TELECOM SOLUTIONS FOR THE 21 ST CENTURY January 21, 2004 ADA* Compliant Emergency Phones with Built-in Digital Voice Announcer E-1600-02A The 1600A Series ADA Compliant Emergency Phones are K-1600-EHFA designed to provide quick and reliable handsfree communi- EMERGENCY cation for any standard analog telephone line or analog PHONE phone system station port. All 1600A Series phones meet ADA requirements for elevator/ emergency tele- Eut phones, and can be programmed from any Touch TEU NONE' Tone phone. The phones can dial up to 5 program- mable emergency numbers, as well as 2 ---,� central station numbers. In addition, the E- i� 1600-20A and E-1600-52A feature a sec- . liiti� ,Ml yea -FwEM and "INFO"button that will dial up to 3 non- ------- emergency numbers. E-1600-45A E-1600A E-1600-03A ------ E-1600-55A E-1600-20A The 1600A Series phones can be pro- grammed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A"Call Connected"LED can be initiated manually or automatically. All programming parameters, includ- ing phone numbers and location numbers, are stored in non-volatile E2 memory. All units are phone line powered, requiring no batteries or external power and are compatible with common Central Station Monitoring equipment. For outdoor or harsh environments, select 1600A Series phones are available with Enhanced Weather Protection (EWP). EWP.products feature rubber gaskets and boots, hand soldered silicon sealed connections, gel-filled butt connectors,as well as urethane potted circuit boards with weather sealed,field-adjustable trim pots and DIP switch- es for easy on-site programming. Features Applications • Meets ADA requirements for Emergency Phones: Elevators -Can automatically light the"Call Connected"LED for the Parking ramps/lots hearing impaired ATM machines Transmits a unique location I.D.code or voice announcement Area of refuge locations Grade 2 Braille label for the visually impaired Lobbies • Non-volatile digital voice announcer with 16 seconds of voice memory Entryways • Advanced call progress detection Campus emergency stations • Handsfree operation Roadside emergency stations • Phone line powered Stadiums • Non-volatile E'memory(no batteries required) Convention centers • Touch Tone or pulse dialing • Dials up to 5 emergency numbers E-1600-20A and E-1600-52A dial up to 3 non-emergency"INFO" Americans with Disabilities Act of 1992 contains federal reg- numbers ulations regarding elevator telephones(Public Law 101-336). • Cycles through backup emergency and non-emergency numbers on busy or no-answer . • Optional Enhanced A Need More Information on EwP1 Specifications Weather Protection(EWP) Call(715)3864345 and select 859. • Hangs up on CPC,silence,busy signal,dial tone,time-out or Touch Power: Telephone line powered, 24V DC talk battery with 20mA loop Tone command current minimum • Programmable to auto-answer on incoming calls Dimensions:See Installation and Specifications • Remotely programmable Operating Temperature:-26"C to 54"C(-15•F to 130•F) • Extended temperature range(-15•F to 130•F) Humidity-Standard Products: 5%to 95%non-condensing • 7 different chassis or board only available Humidity-EWP Products: Up to 100% • Available in a 42"tall tower phone model E-1600-BLT-EWP CAUTION-When installing on an analog extension of a phone system: • Central Station Monitoring capability(dials 2 numbers) Some phone systems do not conform to analog telecom standards and might • Separate central station voice speed dial number not be compatible with the 1600A Series emergency phones.For a detailed Optional PB-100 Polling System available description of the telephone line specifications required for any of the 1600A • Optional BLK-3-EWP strobe light kit available Series phones,retrieve Fax Back Document 869, IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT:VIKING TECHNICAL SUPPORT AT(715)386.8666 a Our Technical Support Depatrnent is available for assistance Monday Berm-bpm and Tuesday through Friday Sam-Spm central time.So that we can give you better!wrvrce.before you call please. 1.Know the model number,the serial number ad what software version you have(see serial label). 2.Have your Technical Practice in front of you. 3.It is best it you are on site. RETURNING PRODUCT FOR REPAIR RETURNING PRODUCT FOR EXCHANGE The following procedure is for equipment that needs repair. The following procedure is for equipment that has failed out-of-box(within 10 days of purchase): 1.Customer must contact Vikings Technical Support Departnent at 715-386-8666 to obtain a Return Authorization(RA) 1.Customer must contact Vikings Technical Support at 715-386-8666 to determine possible causes for the problem.The number.The customer MUST have a complete description of the problem,with all pertinent information regarding fhe customer MUST be able to step through recommended tests for diagnosis. defect,such as options set,conditions,symptoms,methods to duplicate problem,frequency of failure,etc. 2.If the Technical Support Product Specialist determines that the equipment is detective based on the customer's input 2.Packing:Return equipment in original box or in proper packing so that damage will not occur while in transit Static and troubleshooting,a Return Authorization(R.A.)number will be issued.This number is valid for fourteen,(14) sensitive equipment such as a circuit board should be in an anti-static bag,sandwiched between foam and individual- calendar days from the date of issue. fy boxed.AU equipment should be wrapped to avoid packing material lodging in a sticking to the equipment Include 3.After obtaining the R.A.number,return the approved equipment to Your distributor referendna the R.A.number.Your ALL parts of the equipment.C.O.D.or freight cold shipments cannot be accepted.Ship cartons prepaid to distributor will then replace the product over the counter at no charge.The distribute will then return the product to Viking Electronics,1531 Industrial Street, Hudson,WI 54016 Viking using the same R.A.number. 3.Return shipping address.Be sue to include you return shipping address inside the box.We cannot ship to a PO Box. 4.The distributor will NOT exchange this product without first obtaining the RA number from you.If you haven't 4. RA number on carton:In large printing,write the R.A.number on the outside of each carton being reMned followed the steps listed in 1,2 and 3,be aware that you will have to pry a restocking charge. WARRANTY Viking warrants its products to be free from defects in the workmanship a materials.under normal use and service,for a period of one yea from the date of purchase from any authorized Viking distributor or 18 months from the date manu- twt red,which ever is greater.If at any time during the warranty period,the product is deemed defective or malfunctions,return the product to Viking Electronics,Inc.,1531 Industrial Street,Hudson,VJI.,54016. Customer must contact Viking's Technical Support Department at 715-386-M to obtain a Return Authorization(R.A)number. This warranty does not cover any damage to the product due to lightning,over voltage,under voltage,accident misuse,abuse,negligence a airy damage caused by use of the product by the purchaser or others Vikings sole responsibility shall be to repair a replace(at Viiking's option)the material within the terms stared above.VIKING SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSE- QUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESSED OR IMPLIED,OR FOR ANY OTHER FAILURE OF THIS PRODUCT.Some states do not allow the exclusion a Ifmi- labon of incidental or consequential damages,so this Imitation may not apply to you. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,EXPRESSED OR IMPLIED,INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,WHICH ARE HEREBY EXCLUDED BEYOND THE ONE YEAR DURATION OF THIS WARRANTY.Some states do not allow limitation on how long an implied warranty lasts,so the above limitation may not apply to you. FCC REQUIREMENTS If the trouble is causing harm to the telephone nelwork,the telephone company may request you to remove This equipment complies with Part 68 of the FCC rules.Located on the equipment is a label that contains, the equipment from the network until the problem is resolved. amp other information,the FCC registration number and finger The E-1600A Series phones use the USOC jack RJ11C. n9 gequivalence number(REN).If requested,this It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is cort- The FEN is used to determine the quantity of devices which may be connected to the telephone line. information must be provided to the telephone company. netted.This is to avoid damaging the equipment caused by local lightning strikes and other electrical surges.Excessive REN's on the telephone line may result in the devices not ringing in response to an incoming a This equipment is Hearing-Aid Compatible(HAC).11.In The telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other most but not all areas,the sum of the REIVs should not exceed fine(5.0)To be certain of the number of devices electronic device,including fax machines,to send any message unless such message clearly contains in amar- that may be connected to the line,as determined by the total REN's,contact the telephone company to deter- mine the maximum REN for the calling area. gin al the top or bottom of each transmitted page or on the first page of the transmission,the date and time it is This equipment cannot be used on the telephone company-provided coin service.Connection to Party Line sent and an identification of the business or other entity,or other individual sending the message and the tele- Service is subject to State Tariffs. phone number of the sending machine or such business,other entity,or individual.(The telephone number pro- If this equipment causes harm o the telephone , corn vided may not be a 900 number or any other number for which charges exceed local or long-distance transmis- phone network the telephone parry will ratify you in advance that temporary discontinuance of service may be required.If advance notice isn't practical,the telephone com you charges.) pany will notify the customer as soon as possible.Also,you will be advised of your right to file a complaint with PART 15 LIMITATIONS the FCC if you believe it is necessary. This equipment has been tested and found ig comply with the limits fora Class A d gga device,pursuant toPart The telephone company may make changes in its facilities,equipment operations,or procedures that could 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference affect the operation of the equipment If this happens,the telephone company will provide advance notice in when the equipment is operated in a commercial envinonment This equipment generates,uses,and can radr order for you to make the necessary modifications in order to maintain uninterrupted service. ale radio frequency energy and,if not installed and used in accordance with the instruction manual,may cause If trouble is experienced with this equipment please contact Viking Electronics,Inc., 1531 Industrial harmful interference to radio communications.Operation of this equipment in a residential area's likely to cause Stneef,Hudson,111154016 (715)386-8666 harmful interference in which case the user will be required to correct the interference at his own expense. Installation and Specifications A. Standard 1600A Series Phone Rear View of a Standard Analog 1600A Series Phone PABX/KSU C.O.Line Station OIL ?OR t�® IMPORTANT.• Electronic 0 ®� o Q devices are susceptible to lightning and power station Spade electrical surges from both the AC Terminal 0 0 (included) outlet and the telephone line. It is o recommended that a surge protec- RJ11 o O �1 for be installed to protect against .......•••-- � � Cos such surges. Contact Panamax at or 0 'Earth Ground(optional) (800) 472-5555 or Electronic Specialists Inc. at(800) 225-4876. B. 1600A Series Phone with EWP 'Note: To increase surge protec- Rear View of a 1600A tion, loosen the PCB mounting Analog Series EWP Phone screw labeled (1) (as shown)and PABXIKSU T@4ce M @ fasten a wire with spade terminal C.O.Line Station (included)from the mounting screw Gel-Filled to Earth Ground (grounding rod, Butt ConnectorsSpade water i e, etc. (included) Terminal p p ) (included)Red Q OB� 'Earth Ground •-•--- or Green (optional) 2. E- � 60QV nd E- 1600-45A (optional EWP available) mmx 102mm x 51mm(5.25"x 4.0"x 2.0") Shipping Weight: 1.13 kg (2.5 lbs.) Material: .062"(16 gauge)steel, E-1600A- Red powder paint, E-1600-45A-High visibility yellow powder paint Connections: Standard E-1600A/E-1600-45A-RJ11, E-1600A-EWP/E-1600-45A-EWP-Gel-filled butt connectors Mounting:Surface mount to walls,posts,single gang boxes or 4"x 4"electrical junction boxes or recess mount in elevator phone boxes. Optional Enhanced Weather Protection(EWP): The optional EWP products feature sealed trim pots, sealed DIP switches, hand sol- dered and silicon sealed connections, rubber boots and gaskets, urethane potted circuit boards and A Need Mor0Info,; t/on on EWP? gel-filled butt connectors. call(715)386.4345 and select aye. Note:For greater weather resistance, apply a bead of clear silicon caulking around the top edge and sides of the chassis �-4.00 ►I 3/4"Knock -2.00� �2.00--►4 3.40 out (4).20 diameter mounting holes EMERGENCY E PHONE Bottom ' 0 M 0,=7 r- 0 0 View + 0.703 Q Q Q 1.15 E diameter 0 0 R 4.96 5.25 0 •.. ...Grade 2 Condensation.. G + 3.30 3.40 CALL NooF�.E-Tw^n Braille Label Drain Hole E .•' CONNECTED 1.70 Rear Vie Connected LED w PUSH FOR - "Red Call E-1600.45A N only...... ------ O L ►( .. .....Push To `-'J Call Button Side View Y (2).20 x.40 slots 1.7 I for single gang box Front View .15 x.31 wire exit notch 3.62 1I E-16QQ-02A 10.5 Dimension . Omm x 267mm x 51mm (13"x 10.5"x 2") 0.25 °.25 � -10.0 Shipping Weight: (7 lbs.) -IT t� -4 Connections: RJ11 Material: .125"(11 gauge)brush�' s 3.1 3.6 a.aSide Mounting: Flush mount in elevairwells, hall- 625 E ER Y view ways, etc. Suggested Hardware: (6)#8 x 3/4 flat head phillips sheet ONE type A screws(not included) t30 Mi um _ 1 Cutout---- Red Call a 7 12.5 "" Connected '"' LED Grade 20 Braille Label '""'• Push Call Button Front View (6)0*188 diameter counersunk holes I I.-2.0 K- I -E FA Dimensions: 251mm x m x 53mm (9.875"x 6.86"x ontF View 2.10") Shipping Weight: .91 kg(2 lbs.) EME NCY Material: .062"(16 Gauge) Red powder pain teel ONE Connections: RJ11 Mounting: Recess mounted in standard elevator phone b YODEL K-1000-ENFA (10.0"x 7.0"x 3.0") e.so 0 0 0 9.17 0 0 0 � 0 � &............Red Call Grade 2........ ••••......• •••••••••••••••••SH Connected LED v•••...Push to Call Side ... Button View Top Vie (2)countersunk•• •••• mounting holes for#8 flat head screws(not 0.675 .+ vgte. included) 1.60 0.70 H 2.10 ►I 6.86- IJ 3. E- 1 600-20A (optional EWP available) D ensions: Overall-127mm x 127 x 57mm(5.0"x 5.0"x 2.25"), Plastic Electrical Box-102mm x 102mm x 54mm(4.0"x 4.0"x 2.14") Ship • g Weight: 1 kg(2.12 lbs.) Front Pa I Material: 14 gauge brushed stainless steel Connection Standard E-1600-20A-RJ11, E-1600-20A-EWP-Gel-filled butt connectors Optional Enhan d Weather Protection (EWP): The optional EWP products feature sealed trim pots, sealed DIP switc hand Sol- Need More In/ormatio n EWP1 dered and silicon sealed connections,rubber boots and gaskets,urethane potted circ oards and gel- s.Call(715)3864345 and se t 859. filled butt connectors. Mounting with Plastic Ro -In Box (included): Flush into walls, mounts to side of wall stud Mounti with Optional VE-5x5: Surface mount to walls, single g boxes,double gang boxes, posts,or to a Viking VE-GNP Gooseneck destal (see options below). Caution: When warm air comes in co ct with cold surfaces, such as outside walls and conduits, ' causes condensation. To prevent condensation from accumulating inside the -1600-20A always bring conduit into the bottom oft unit. If this is not possible, drill a 114" diameter hole in the bottom of the black plastic x. 2.1" ••Adhere gasket to front panel, 10.50" Front View of 4,0" I taring over mounting holes 5 3.25"� Plastic Rough-In / \� Box(Included) ILA 3.81" GENOY® e e 0 0 ��cNEJQ o o 5.0" 4•• Condensation 15 Q Q Drain Hole 0 0 QHELP de 2 Braille ••• 3/4"Knockout INFO ®®, Label for conduit Front View of Optional Win knock out 0 r p"pus o VE5x5(not included) . ........Call p"Push t 2.25" --• 2 Standard flat Mad d wall ' • 39.5" ( ) dry (4)0. diameter............. (sheet rock)screws(not Included) : °............••••Call Connected i 41.41" Red LED (4)0.2 x 0. lots......... The black plastic rough-in box(part#259576 may be • ' for double ga ox i y I...................."Info"Push to Call Button purchased separately(Example: Mounting boxe o (2)02 x 0.43 slots +........................(4)6-32 X 3/4"stainless steel,flat for single gang box studs before the walls are finished for flush ' Ila- head,hsxdrive,screws(included) tan). Go to www.vikingelectronics.com click on Condensation Drain Hole "Spare Parts"to order these rough-in es. .... ....� 3.3,E *Note: Peel off paper ner and adhere gasket to the back of the faceplate, cen- Knockout... j 1 tering it over the f corner mounting holes. 3.0" 3.0" Important. careful to position the modular jack inside the chassis as not to Rear View of VE5x5 Side View of VE-GNP damage a components on the circuit board. The E-1600-20A will NOT mount (net Included) (not included) to a ndard double gang box. A Need More Information on the VE-5x5 or VE-GNP?) Call(715)386-4345 and select 424. E- 1600-03A (optional EWP available) Dimension . 183mm x 149mm x 39mm (7.22"x 5.86"x 1.55") Material: .074" gauge)Brushed stainless steel panel and extra heavy duty button with LED Shipping Weight: kg (3 lbs.) Connections: Standard 600-03A-RJ11, E-1600-03A-EWP-Gel-filled butt connectors Mounting:Surface mount to posts,single gang boxes or 4"x 4"electrical junction boxes or recess m in elevator phone boxes. Optional Enhanced Weather Pro ion (EWP): The optional EWP products feature sealed trim po , ealed DIP switches, hand sol- dered silicon sealed connections,rubber boots and gaskets thane potted circuit boards and gel- filled butt co actors. Note:For greater weather resistance, apply a be f clear silicon caulking around the edge and sides of the chassis Front View - 5.36 Condensa Back View Drain Hole ••• EMERGENCY 1.69 (4).22 diameter TELEPHONE mounting holes ••' 1.55 0.781 Grade 2.... • • 1.70 diameter ......... � Braille Etching N 722 Bottom View 3',�O + 3.30 MODEL E-1600-03 6.78 Push To Call Button Push to Call e e eve a ee e with Built-In Red .••• 0 e e seo e Call Connected LED o e e e CALL e RECEIVED a e e e '••(2).187 x.50 WHEN LIT VIKING. slots for single f1,7o 3.40 gang box 0.80 8-32 x.5"set 4. screws provided 5.00 'S Bu ua 3 suauas uopaoloid auoydoja!w �(uways se)wloy auoydoia!w pue jayeads uno Bup JOA03 lsnP I isel io (p p I I) aluaa a n au w,aias pue ieyeads lams sselule3S..... 'VSS-009L-3 943 to hued luo4 01 layseB GJ84Pe pue 'eAPPxa4'Pea43eg pals ssalulels.VIE x ZE-9(0)— 3noNa )4 (pasn lou)salo4 Bulyaeq 8w0w8a•pued pe4slup Ja yoeq of mleads pue 0Iw 0 ...wMA -•--•-Bulpas Apeallsn000e jo;(papnpul)3e11seB weal llol4l O's ...................•hued P84slu8 a 10 ONG 0 0 llaeq 943 of 1!un*41 l J sloy eaueleala jaiaweip gZ,0(t) i—ed ............... ...lsnp 843 Bullunow Bu!uel peyslu ud liel lul I 'r 6uryalse3 0l Loud 0e!soej ul lol saloy ilunualunoq(y) 0 0 0 -l8n03 3snp .............. xlawel4 pannbei 1!pappe 0 .0 O eq Aew LaBual ej!m IeugpPPV :93oN 11-19 ulw Vw00 LloaAOS 10 B 1 I _ laeluoa Vl!M 4a31M Unq -L'Z .✓ 0 4 yaelg 4snd,Geluawo loauuo3 Bs'► cc'E lams paleld Oum •1e'•a •wI ourz(96ne6 9l)joI4).Z90.0 :lel.laleW 0'9 3 Meg Owu uws wa••ems.••n 3 sleulwial apeds-4ollmS's)nu dAl „ ailm Lo Joef ll rH-oolal :suoµoauuo:) SZ9'E } 1•P (a1o4�alawelP.SZ-0esa,Inbw) (ql 9'L)6M£L' :44610M 6ulddl4S ,M paa �epiey Oupunow papnlaul �a38we14 41! l.Polaauuoo ROO.PON 9L'L 0'Z '69810010S Pue S4EI (SLL)IP=o (uols,ee 1dM3 uo uopeuuoLu!-an peep %Vj 'SJOl0al1U0o usu•j �epueas) P•a-'o- all —ld linq PaIIJ-la6 pue spjeoq )Inojio pauod aue4lain (� 'slaJseb pue s)ooq jaggru'suol)0auuoo paleas uoo (auopwn d Muo dM3) u0 su04d -Ills pue paiaplos pue4'Sa4oIlms dla paleas'slod uotaauuoo o3lasuuoo l i ) P dM3 I 3 41 'dAL SZ'0 SL'Z Unq p lltla'J W. aleas a�n ea son ad euol do a OT :(dM3 110010M J041BOM p03ue4u3 leuolldo -9)wado of auoyd ay/jo/sanm)/oe/q pue paj ay;of papeuuoo a W(737 UV :a;oN-(sJo)enala ul puno;uauo) Wm 431Ims le16alul a o)paioauuoo samm a4)pue go)no aq ueo(131 ay)'AlangewallV -a31 941 Jo;9104 unow ja)awelp•gZ-0 e pue 401lms nq 4snd.LSdS Aje)uaw0w a'9u04dojolw pue jaNeads jo;s9104 olpne'aleld 6ullunow jo;(wnwlulw ia)awelp 9#)sp ):aplAoid pino4s laued p lug 941.'laued wo)sno a 6uulnbei uogelleisul ue jo'slaued Jo)enala pwyaq 6ullleisul joi lhl auoyd Aoue6jewe lesianlun a sl -009 L-3 941 (algellene dMleuolddo) b✓� -009 suo/;gauuoo ei/M ajeq pue(saggm paddu/s/s/eu/uua/malos)suopoeuuoo yopms pasodxe e)e/nsdeoue Alaieldwoj '6q/;so;pue suo//oauuoo ge 6u/Hew Jaye sagol(ms uounq ysnd pue O37 jo ap/s Hoeq of(uq/saaA dM3 y//m papn/oq!)eMZl//s 0AlSOu03-uou Aldde'sioop;no uo/sjaA dM3 ay;6u///e;su/{/ :;uepodwi papnpu(laqel elllejq (leuopdo) Moelq Z apeL6 L-1q 'sBn/apeds/o uq/pod/aLeq of smajos uelse/ punaig LIW3, •9104 Bupunow pue s6n)apeds/o uqilLod pwpo/go ino'segol/Ms Le3awelp 9sL'0 fir)----•----; I�OY'Z--►I >faere uoAnq ysnd pepn/oq/ey)5—ualpyi a;oN 910POW dM3 uo •(aloy 6upunow caiawelp-gL•a sannbaL) --)0.(pepnp •igepene lou ue saloy ■ )1aela uoAnq -13H.JO.dl3H MOd Hsnd.ql 139uu00 leuluual Bullunow(Z)eseyl OZ'Z • • aPedS Bum ail sual BuP+lel•a P•a aeds+•ao (slay 6uliunow LalawelP A5Z' r -C (apo47ea O31)>laale l Tj a saJlnbaL)aLempLey fiu.1unow }I (m a auuoo Ilea Pa21 96'0 I�! '' PeLaplos (spoue a3l)POU puey sl uolsJen O G dM3 Poll (a 6ullunow Ja)awelP.SL'a saLmbei s6'z _ 0 C Pea'' VZS 009E 3)uoAnq-OdNI.0313auu00 (VZS/H09-009L-3 P3ePueis) 0-�J((_� �g� pe \I ■1 aup auoyd of loauuoo s'o � • . f-- I (dM3-VZS/dM3-V0S-009L-3) (Aluo dM3) au(l auoyd of loauuoZ) — I �VGOZ'££ uolaauuoa (Aluo dM3) wnwlxelq LVOi E ' —► Anq pal!B-19C) .............lallseg LalleadS 0e'0 6ul)unoW P-1e08 Dd pas l ...(papnlaul)use,ag malA aPIS leued 0- suolsuewia imleadS jelAW (papnlaul) aloy cal Lalleadg -awelp•SZ-0-.0 L'0 a pwyaq(Aal umoys) I 0 916ue plemdn ue le laued JnoA to Noeq F Q 841 01 anlC) 'loos BullunoW 3IW dM3 ' oL'z 09'Z '96eu/ejp jol mope of looq ay){o wol / Lfl Z I -;oq ay)jeeu aq p)noys se)oy agry :ajoN e a!Iry II O �/ -laued Ul 910y La OL'Z—► —*ILZB'0 -wep-SZL'0-.b0'o pwyaq ApoaJlp os SBL- Llr' , ; —09-Z� a! O I jo anl� ')oog Bullunowi aIW p ue;g spnls g8 jo yt Lol A 0 O slols Bullunow ap LLVO x 9£E'0 M. C698 10010s pue SM-99E Iles se104 Bullunow LdM3 uo uopeuu001"J9 paBN '•lawelp OL-0(Z) sioloauuoo l)nq pall)-lab pue sio)oauuoo un al14-199-dM3-VZS/dM3 spjeoq llnojp auod auegiam'slalse6 pue slooq jaggru'suol)oauuoo paleas -V09-009V3 'llf H - VZS/VOS-009L-3 PxNeis :suol)oauuoo U0311!s pue pajaplos pue4 'sa4o)Ims cila paleas 's)od wu) paleas ainieal (ql l,)BM 9 :14Bj9M 6u!dd14S slonpad dM3 leuolldo eqi :(dM3)u0113810M Ja4leaM pa0ue4u3 leuolldo -s/ssey0;nopm;/)/sped y009 s�S!tilN :a;o(al4►el!ene dM3leuolldo) VZq/V05-00 -3 Programming A. Accessing the Programming Mode The 1600A Series emergency phones can be programmed from any Touch Tone A Need Mora Information on the DLE-2008? phone using a C.O. line, analog PABX/KSU station, or a DLE-200B Line Simulator. ca,,(715)38e-4345 and select 605. 1. Using the Security Code Step 1. Move DIP switch 2 to the ON position (sets unit to answer incoming calls, see section J). Step 2. From a Touch Tone phone call the line attached to the 1600A Series phone. Step 3. When the 1600A Series phone answers, enter the 6-digit security code(factory set to 845464, see section C).A double beep should then be heard indicating you have entered the programming mode. 2. Without the Security Code Step 1. Move DIP switch 2 to the ON position (sets unit to answer incoming calls, see section J). Step 2. Move DIP switch 3 to the OFF position (incoming calls enter Programming without security code, see section J). Step 3. From a Touch Tone phone call the line attached to the 1600A Series phone. Step 4. When the 1600A Series answers, a double beep will be heard and will automatically enter the programming mode. Step 5. When finished programming, move DIP switch 3 back to the ON position (see section J). B. Quick Programming Features Enter Digits -then - Enter Memory Location First emergency speed dial number .........................................................................0-20 digits then #00 Second emergency speed dial number ...................................................................0-20 digits then #01 Third emergency speed dial number .......................................................................0-20 digits then #02 Fourth emergency speed dial number .....................................................................0-20 digits then #03 Fifth emergency speed dial number .........................................................................0-20 digits then #04 Central station receiver number ...............................................................................0-20 digits then #05 Central station voice number ...........................:.......................................................0-20 digits then #06 First"Info"speed dial number(E-1600-20A and E-1600-52A only) .........................0-20 digits then #07 Second"Info"speed dial number(E-1600-20A and E-1600-52A only) ....................0-20 digits then #08 Third"Info"speed dial number(E-1600-20A and E-1600-52A only) ........................0-20 digits then #09 Voice announcer options(factory set to 000000) .....................................................6 digits then #17 Timing/Dialing options(factory set to 234111) .........................................................6 digits then #18 Security code(factory set to 845464) ......................................................................6 digits then #19 Identification number(factory cleared) ....................................................................0-20 digits then #20 To add a*at any point in the dialing string ..............................................................** To add a#at any point in the dialing string ..............................................................*# To add a four second pause at any point in the dialing string ...................................*7 To switch to pulse dialing at any point in the dialing string ........................................*6 To clear any speed dial number ...............................................................................(no digits) then #00 -#09 Note: A double beep indicates a valid memory position, four beeps indicate an error. C. Security Code (memory location #19) The security code allows the user/installer to program the 1600A series phone while DIP switch 3 is in the ON (normal) position. The factory set security code is 845464 (V-1-K-1-N-G). It is recommended that the factory set security code be changed. Example: To store 123456 as the security code: Step 1. Access programming as shown is Programming section A. Enter Your Security Code Here: Step 2. Enter 123456 #19.. Step 3. Hang-up. #19 Note: The security code must be 6 digits and cannot include a *or a #. 6. D. Speed Dial Numbers Note: Up to 20 digits can be stored in each dial position. Special features such as pause, mode change, Touch Tone *and#count as single digits. 1. Emergency Speed Dial Numbers (memory locations#00 -#04) The emergency speed dial number programmed in location #00 is the number that To Program: Enter: is dialed when the "HELP" / "CALL" button is first pressed. Additional speed dial * ** numbers will be dialed when there is no answer or a busy signal is detected and the # next number redial features are activated. To program, enter the desired speed dial number followed by the location number(#00-#04). To clear a speed dial location, 4 second pause *7 simply enter the memory location (#00 - #04) alone. The 1600A series phone is switch to pulse mode *6 factory set with no speed dial number programmed. 1 0, 1.2...s 1 0,1,2...9 2. "INFO" Speed Dial Numbers (E-1600-20AI52A Only)(memory locations#07-#09) The information speed dial number programmed in location#07 is the telephone or extension number that is dialed when the "INFO" button is first pressed. Additional information speed dial numbers will be dialed when there is no answer or a busy signal is detected and the next number redial features are activated. The E-1600-20A phone will cycle through the programmed speed dial numbers until answered. To program, enter the desired speed dial num- ber followed by the location number(#07-#09). To clear a speed dial location, simply enter the location (#07-#09) alone. 3. Speed Dial Programming Examples To Program the 1600A Series Phone... Step 1 - See Section A Step 2 -Enter Digits: ...to store 555-1234 as the first emergency speed dial number Enter Programming 5 5 5 1 2 3 4#0 0 ...to store a Touch Tone 9,a four second pause and then a pulse Enter Programming 9*7*6 3 3 3 4 4 4 4#0 8 dialed 33341444 into the second"Info"speed dial memory position ...to clear the first emergency speed dial number Enter Programming #0 0 E. Identification Number(memory location #20) The Touch Tone I.D. number(up to 20 digits) is used by emergency personnel to identify the location of the caller and is given out when the receiving party presses a Touch Tone *. The security office can display the number using a Touch Tone decoder. To program the I.D. number, enter the desired number followed by#20. Example: To store 333 as the I.D. number, enter: 3 3 3#2 0 F. Timing/Dialing Options (memory location #18) There are six positions in the timing/dialing options. To program these options, enter the six desired timing/dialing num- bers followed by#18. The six available timing/dialing options are defined as follows: Dial: A + B + C + D + E + F + # + 1 + 8 1 1 1 1 1 1 Enter Timing/Dialing settings Here: Factory Default Setting: 2 + 3 + 4 + 1 + 1 + 1 A B C D E F Talk/Listen Delay #18 Call Length Silence Time Out Dial Next Number on Ring No Answer Dial Next Number on Busy Pulse Dial Speed Touch Talk/Listen Tone Delay 1 .1 sec Setting A-Talk/Listen Delay 2 .2 sec 3 .3 sec This feature selects switching time between talk and listen modes (VOX switching time). 4 .4 sec 5 .5 sec Use chart at the right. * Note: The factory default is.2 seconds. 6 .6 sec 7 .7 sec 8 .8 sec 9 .9 sec 7. o16 q C Il ength Setting B -Call Length Time Out r4eout4. 0 Disabled This feature selects the maximum length of time that calls can be connected. 1 1 min Programmable in increments of 1 minute up to a maximum of 9 minutes (Touch Tones 1 - 2 2 min 9). Program 0 in this location to disable the call length time out. With the call length dis- 3 3 min* abled, the 1600A series phone must rely on a CPC signal, busy signal, silence or return to 4 4 min 5 5 min dial tone to hang-up. Use chart at the right. *Note: The factory default is 3 minutes. 6 6 min 7 7 min 8 8 min 9 9 min WN Setting C -Silence Time Out 0 Disabled This feature selects the length of time that calls will remain connected without voice activ- 1 10 sec 2 20 sec ity. Programmable in increments of 10 seconds up to a maximum of 90 seconds (Touch 3 30 sec Tones 1 - 9). To disable the silence time out, program 0 in this location. Use chart at the 4 40 sec' far right. * Note: The factory default is 40 seconds. 5 50 sec 6 60 sec 7 70 sec 8 80 sec Setting D - Dial Next Number on Ring No Answer 9 90 sec If enabled and a ring-no-answer is detected, the 1600A seriesA NO rr. >: 1 � phone will dial the next programmed speed dial number, and con- 1 or 0 Disabled' tinue to cycle through the emergency numbers until a call is com- 2,3,4...9 Dials second number after pleted. *Note: This feature is disabled in the factory default setting. 2,3,4...9 rings respectively Setting E -Dial Next Number on Busy If enabled and a busy is detected, the 1600A series phone will dial the next pro- grammed speed dial number, and continue to cycle through the emergency num- A6.4 Setting=E�`_ bers until a call is completed. * Notes: This feature is disabled in the factory 1 Disabled* default setting. If the busy signal is interrupted with a promotional message, con- 2 Enabled tact your central office to have it removed. Setting F - Pulse Dialing Rate (Pulses per second) The 1600A series phone is capable of different pulse dialing speeds. 9.Efi0 sn -� * Note: The factory default setting is 10pps. 1 10 pps* 2 20 pps G. Voice Announcer Options (memory location#17) The 1600A series phones have a built-in non-volatile digital voice announcer that may be used to identify the location of the emergency phone call. The 16 seconds of digital record time is recorded remotely from a Touch Tone phone. Programming options are as follows: Dial: A + B + C + D + E + F + # + 1 + 7 I I Factory Default Setting: 0 + 0 + 0 + 0 + 0 + 0 Enter Settings Here: Two Digit Announcement Delay{ A B C D E F Repeat Announcement Setting 0 0 0 #17 Future Use (enter"0") Settings A and B -Announcement Delay The 1600A series phone is factory set to automatically start playing the Touch Toneb- $ettng A/B- - voice announcement after it has determined the call has been answered. 00 Play automatically Alternately, the announcement may be programmed to play after a pro 101-99 1-99 seconds* grammed amount of time, from 1 to 99 seconds after dialing. *Note: If the announcement delay time is used,you must allow enough time for the 1600A series phone to detect 8. ring-no-answer and busy signals when using the redial features. The factory default is set to play automatically. Setting C - Repeat Announcement Option The 1600A can be programmed to play the announcement from 1-9 times, Pouch Tone Set#mg C_, or to continuously repeat the announcement every 8 seconds until a 0 Repeat every 8 secs" Touch Tone * is detected from the distant party. The I.D. number (if pro- grammed) will be sent and the call connected LED will turn on automati- 1-9 Repeat 1-9 times cally after the announcement has stopped repeating. • Note: The factory default for the 1600A series phone is to repeat until a *is detected(digit 0). H. Recording the Announcement Step 1. Call into the 1600A series phone with a Touch Tone phone and access programming. Step 2. Enter*4,wait for the tone and then begin recording. Sixteen seconds of record time is available. Step 3. Enter any Touch Tone to stop the recording. Playback is automatic. Step 4. Enter*5 to review the announcement again. Step 5. 1 If you choose to not use a voice announcement, enter*3 to clear the recording. Example: "Elevator number 1215, located in the Financial Building, needs assistance. Press the asterisk (*) key on your telephone to start and stop this announcement..." I. Automating the Call Connected LED There are two methods of turning on the Call Connected LED. The LED will turn on after a Touch Tone * is detected from the distant party or after the voice announcer is finished playing a programmed number of times. If you want the Call Connected LED to light automatically when the call has been answered, but you don't want a voice announcement to be played, follow these programming steps: Step 1: Step 2;, Step,3:; Access Programming as shown in section A Make a short(1 second) recording of silence Enter digits: 001000#17 J. DIP Switch Programming/Speaker and Microphone Adjustments Two POTS are provided to increase or decrease speaker volume and microphone sensitivity. In certain noisy locations the microphone sensitivity may need to be decreased as shown below. Caution: Setting the microphone gain too high may cause distorted audio, prevent the distant party from breaking over and inhibit second number redialing. s1r w O +- E o ,tom ® - C} 4 _— O + 1 ON "HELP"/"CALL" button alternately connects ffrTic �,��'�a and disconnects calls facto default Speakers. I Microphone (factory ) Volume p ( i Sensitivity 1 OFF "HELP"/"CALL"button connects calls only O� a 2 ON Incoming calls answered (factory setting) oolJ_p�JJ� o O I DIP Switches 2 OFF Incoming calls are not answered Qpp_� o t 3 ON Normal operation mode(factory setting) C]C�o 02 3 3 OFF Learn mode -Any incoming calls are auto- Off On matically entered into the programming (DIP Switches shown mode (no security code required). Use this in factory setting) option if you have forgotten your security code. K. Central Station Programming The standard 1600A emergency phone is capable of communicating using the "Ademco Contact I.D.", "Ademco High Speed", "DTMF 4+1 Express", or the "DTMF 4+2 Express" formats.All formats use the programming memory location #20 to store the account code and alarm details. 9. 1. Central Station Programming Features a. Accessing the Programming Mode Before programming, you must access the programming mode (see Programming section A). b. Enabling/Disabling Central Station Mode The 1600A Series emergency phone can be placed in the "Central Station Mode" by entering a central station phone number in position #05 while programming. To cancel the "Central Station Mode," clear position #05 by entering #05 only (see Programming section D). c. Ring Delay When the 1600A Series emergency phone is in the "Central Station Mode", it is best to have the ring delay set to a minimum of three, because some receivers send a long tone after answering the line that sounds like a ring back. If the 1600A is set to a ring delay of two, the phone will disconnect (see Programming section F). To Program the 1600A Series Phone... Step 1: Step 2-Enter Digits: ...to enable central station programming and dial 952-2567 Enter Programming 9 5 2 2 5 6 7 #0 5 ...to disable central station programming Enter Programming #0 5 d. Speed Dial Numbers The 1600A Series phone can be programmed to dial a central station receiver only, or dial up to 5 voice num- bers first, and if no answer, then dial the central station receiver. When calling the first numbers (memory posi- tions #00404 (see Programming section D), the phone stays in "two-way talk mode" allowing two-way con- versation. When calling the Central Station number (memory position #05), the phone is in a "listen only mode" in order to interpret the hand shake signals of the receiver. A second central station number position has been provided in location #06 that is used when the central sta- tion receiver does not have a talk over mode. If a number is placed in position #05 and position #06 is cleared, the E-1600A will call the central station monitor receiver. After the receiver sends a kiss-off, the E-1600A lights the "Call Location Call Type Connected" LED and goes into two-way talk mode. If numbers #00 Voice- Emergency are in both positions #05 and #06, the E-1600A will call the #01 Voice- Emergency receiver first, and after the kiss-off, will hang-up and redial the #02 Voice- Emergency number in position #06 for two-way voice communication #03 Voice- Emergency Notes: If only a central station is to be dialed, the central sta- #04 Voice- Emergency tion phone number must be preprogrammed in memory loca- #05 Central Station Receiver tion #05 and memory locations #00404 must be cleared. The #06 Central Station Voice Line "Call Connected"LED will light automatically if there is a voice #07 Voice- "Info"(E-1600-20A/52A only) recording programmed. #08 Voice- "Info" (E-1600-20A/52A only) #09 Voice- "Info"(E-1600-20A/52A only) 2. Central Station Formats The following examples explain the receiver formats and how to properly program memory location #20. Each for- mat starts with a four digit account code. This is the code that is assigned by your central station for billing purpos- es. You must access the programming mode before programming these features (see Programming section A). Important: If a number is shown, you must use that number. If an X'is shown, use any appropriate number. a. Ademco Contact ID Format This DTMF format consists of a four digit account code, two digit message type, and a nine digit data field. XXXX 18 1 14000 XXX #20 Account Code I L--Memory Location Message Type Any number to identify phone New Event General Alarm Enter Contact ID Settings Here: 18 1 14000 #20 10. b. Ademco High Speed Format This DTMF format consists of a four digit account code, eight zone codes and one alarm type digit. With this format you can identify up to eight different phones by using a zone per phone.A"5" in a zone position means no alarm. The following example shows an alarm from the third phone. XXXX 551 55555 7 #20 Account Code J I LMemory Location L Idle Zone -Normal Alarm New Event Enter Ademco High Speed ID Settings Here: 55 1 55555 7 #20 c. 4+1 Express Format This DTMF format consists of a four digit account code, two digit message type, and a single digit event code. XXXX 17 X #20 Account Code - Memory Location Message Type Event Code Enter 4+1 Express ID Settings Here: 17 ❑ #20 d. 4+2 Express Format This DTMF format consists of a four digit account code, two digit message type, and a two digit event code. XXXX 27 XX #20 Account Code Memory Location Message Type Event Code Enter 4+2 Express ID Settings Here: 27 m #20 Operation A. Standard Operation 1. "HELP" /"CALL" Button When the"HELP"/"CALL" button is pressed, the 1600A series phone goes off-hook and dials a pre-programmed telephone number. The Call Connected LED momentarily flashes during tone or pulse dialing. In the event that the line is busy or there is a ring-no-answer, the unit can be programmed to call additional phone numbers. The phone then cycles through up to 5 pre-programmed emergency numbers until the call is answered. When the call is answered, handsfree communication to emergency personnel is established. The digital voice announcer will auto- matically play to identify the location of the emergency call. The * key will stop the announcement, send the I.D. number(if programmed)and light the"Call Connected" LED. Alternatively,the phone can be programmed to auto- matically light the "Call Connected" LED after the announcement has played a programmed number of times. The distant party will know the location of the emergency call by either the voice announcement or by decoding the Touch Tone I.D. number. Pressing the * key again will send the I.D. number and play the message again. Once the * key has been pressed, the#key can be used to force the phone to hang-up. 2. "INFO" Button (E-1600-20A and E-1600-52A Only) When the"INFO" button is pressed (E-1600-20A and E-1600-52A only), the phone goes off-hook and dials the first "INFO" phone number programmed. If a busy signal is detected or the call goes unanswered, the phone will cycle through all three "INFO" phone numbers until the call is answered. When answered, handsfree communication is established. Note: The voice announcement is for Emergency/Help calls only and will not play on a call initiated from the "INFO"button. 11. B. Central Station Operation After the "HELP"I"CALL" button on the 1600A Series phone has been pressed the 1600A Series phone will begin to dial. If a voice number is programmed in memory locations#00404, these numbers will be dialed first. Upon detect- ing a busy signal or after a preprogrammed ring delay the 1600A Series phone will hang-up and dial the central sta- tion phone number stored in memory location#05. When the central station receiver answers, it will send a handshake tone to the 1600A phone. Upon detecting the handshake tone,the 1600A Series phone will begin uploading the infor- mation stored in memory location #20. Once the 1600A Series emergency phone has sent the information stored in memory location #20, it waits for a"kiss- off"tone from the central station. When the "kiss-off"tone is received, the emergency phone turns on the call connect- ed LED and goes into the "two-way talk mode" or hangs up and dials position #06 if programmed. Note: The central station should have a `talk-over"feature that will allow a two way conversation at this time. If your receiver does not support a 'talk-over". A voice phone number should be programmed into position #06. If the central station answers the call and does not send a"kiss-off", the next number will be dialed (if programmed). In either single number or multi- number programming, the phone will keep dialing until a call is completed. Options Enhanced Weather Protection (EWP) Some applications demand the extra protection of EWP. For example: phones fhat are exposed to the ele- ments, a corrosive atmosphere, or vehicle exhaust all need the extra weather and corrosion resistance of EWP. EWP is available on the following Viking models: E-1600A, E-1600-03A, E-1600-20A, E-160045A, E-1600-50A, E-1600-52A/55A, K-1700-3, Need More Information on EWP? PB-100 E-1600A- EWP-EWP and BLK-3-EWP. A Call(715)386-4345 and select 859. a System ' PB-100 Polling and Diagnostics Kit r, The PB-100 system provides centralized polling and diagnostics of all Viking 1600 and 1600A _ series emergency phones through a standard Windows 9x/NT P.C. In addition, any device or -� human capable of returning DTMF Touch Tones can be automatically polled. Up to 500 individual phones can be polled, at timed intervals, for the diagnosis of proper pro- gramming and operation. A Need More 345 Information on the PB-loo? BLK 3-EWP Strobe Light Kit Call(715)386-4 and select 860. The BLK-3-EWP can be used to add emergency notification to pre-installed emergency phones.The BLK-3-EWP is equipped with Enhanced Weather Protection (EWP)and will not flash on "Info"calls when used with the E-1600-20A or E-1600-52A.Alternatively,the BLK-3-EWP provides high visibili- ty indication of analog line status through a high powered strobe light. The BILK-3-EWP is an ideal solution for the hearing impaired and can be used equally well in loud warehouses or factories,where ringing phones can not be heard. CO WP Need More Information on the BLK-3-E ? BLK-3-EWP Call(715)386=5 and select 653. E E Special Housing A variety of special housing is available for the 1600A Series emergency phones. The VE- E 5x5 surface mount backbox may be used with the E-1600-20A-EWP to allow surface mount- pi ing or mounting to a gooseneck pedestal. A Need More Information on the VE-5x5? n Call(715)386-4345 and select 424. G The weatherproof VE-9x12 may be used with the E-1600A,E-1600-03A,E-1600-20A and E- .. �7 160045A for extreme weather and vandal protection. Need More Information on the VE-9xl2? E The VE-9x12 is available in yellow or red. A Call(715)386-CU5 and select 413. 42" Tall ADA Tower Phone with Integrated Blue Strobe Light VE-9x12 0 C Provide added safety for your patrons,employees,and students with the addition of high-visibility,ADA Compliant emer- Y Y gency communication.At the push of a button,the E-160OA-BLT-EWP(shown right)will initiate a call to your emergency personnel and send a digital announcement to identify the location of the emergency call. In addition,the Tower Phone's _ bright(1 million candle power)Strobe Light will instantly begin pulsating to deter further activity and make it fast and easy for Police or Security personnel to locate the site of the emergency.The phone comes complete with Enhanced Weather Protection (EWP), as shown above. Need More A Information on the E-160oA-BLT-EWP? E-1600A-BLT-EWP Call(715)386.4345 and select 217. - Product Support Line... 715.386.8666 Fax Back Line... 715.386.4345 Due to the dynamic nature of the product design,the information contained in this document is subject to change without notice.Viking Electronics,and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information.Revisions of this document or new editions of it may be issued to incorporate such changes. Fax Back Doc 215 Printed in the U.S.A. ZF301710 Rev E 12. k';, General Cable Product SKU: 2131377 Product Description: Category 3,PVDF Jacketed, Unshielded Twisted Pairs(UTP),Type: CMP,Pairs: 100, Gauge Size (AWG): 24, Jacket Color:Natural,Packaging: 1000'Non-returnable reel(RL) Product Category: Data Communication-Category Cables -Category 3 Plenum-PVDF Fluoropolymer Jacket Product Construction: Category: • 3 Engineering Specification: • 4458S Type: • CMP Conductors: • 24 AWG solid bare annealed copper Insulation: • Flame retardant semi-rigid PVC Color Code: • See Color Code Chart Rip Cord: • Applied longitudinally under jacket Jacket: • Sequential footage markings • Tough low friction PVDF fluoropolymer Jacket Color: 9 Natural Product Specification: No. of Pairs: • 100 Conductor Size(AWG): • 24 Standard Packaging: • 1000'Non-returnable Wood Reels Outside Diameter(in): • 0.74 Approximate Weight(lbs per • 377 1,000 ft): Standard Package Quantity: • 1 Footnote: • Data subject to change without notice. Contact your Customer Service Representative for latest information. UPC#: • 079407502752 Put-up: • 1000 SCC-14: 9 50079407502755 Cube: • 26956.8 Weight Per Unit of Measure: • .377 Product Information: Applications: • 10 BASE-T(IEEE 802.3) • 100 VG-AnyLAN • 4 Mbps Token Ring(IEEE 802.5) • 52 Mbps ATM • T1 • Voice Compliances: • ANSI/ICEA S-90-661(Category 3) ANSI/TIA/EIA 56813.2 (Category 3) • UL and c(UL)Type CMP Reference Charts CABLE MANAGEMENT HORIZONTAL PANELS, ' VERTICAL PANELS & RACKS Tech n o l o g i e s INSTALLATION INSTRUCTIONS 1 . PART NUMBERS RACK HORIZONTAL CABLE MANAGEMENT VERTICAL CABLE MANAGEMENT SL-RACK1 SL-HORG1 SL-VORG1 SL-VORG2 SL-VORGBKT 2. RACK INSTALLATION 2.1 ASSEMBLE RACK 2.1.1 Install top angle to upright channels. Finger tighten only. A ' 2.1.2 Install the base angles to the vertical upright channels. Finger tighten only. 2.1.3 Stand rack upright. Square the upright channels with the base using a carpenter square. Completely tighten all bolts. See the diagram below for dimensions needed to locate the rack and the vertical cable management. 2.2 MOUNT RACK TO FLOOR 2.2.1 Securely mount the rack to the floor using the appropriate hardware based on the floor construction (concrete, raised floor, or wood). 4 • 3. HORIZONTAL CABLE °•; '•�, MANAGEMENT INSTALLATION 3.1 ATTACH HORIZONTAL CABLE MANAGEMENT PANEL 3.2 Use four (4) 1/4" - 20 x 1/2" screws to fasten the horizontal 0 FRONT BACK #12-24 X 1/2"SCREWS INSTALLATION INSTRUCTIONS 4. VERTICAL CABLE MANAGEMENT INSTALLATION Distance Between 4.1 ATTACH CENTER MOUNTED VERTICAL CABLE Rack Mounting Holes MANAGEMENT PANEL 4.1 .1 Mount the racks to the floor (with the appropriate space indicated in the chart below) using #12 - 24 x 1/2" screws (supplied with the vertical panels) to fasten the vertical management between the racks. Panels fasten to the back of the vertical channel uprights. CENTER BRACKET ASSEMBLY FRONT BACK For use with 6"x 6" and \ 6"x 8"vertical panels M12-24 X 1/2"Screws —— SL-VORGBK BACK 4.2 ATTACH SIDE MOUNTED VERTICAL CABLE _ MANAGEMENT PANEL FRONT ——� 4.2.1 Use #12 - 24 x 1/2" screws (supplied with the vertical panels) to fasten the vertical management between the racks. #12-24X1/2"Screws Panels fasten to the back of the vertical channel uprights. BREAK OFF FINGERS OF 4.3 VERTICAL TO HORIZONTAL JUNCTION VERTICAL MANAGEMENT WHERE IT MEETS THE 4.3.1 Break the fingers off the vertical panel where it meets the HORIZONTAL MANAGEMENT horizontal panel. ° 4.3.2 Route the cables through the strain relief brackets as shown. 4.3.3 Place snap in wire retainer between duct fingers. 4.3.4 Turn retainer 90°. 4.3.5 Push retainer to end of fingers until it snaps in place. THREAD CABLES THROUGH HORIZONTAL AND VERTICAL THE STRAIN RELEIF BRACKET CABLE CAPACITY CHART ScTP or Cat 6 UTP Cable Cable .187" Dia. .25" Dia. Fiber 3mm Part No. Front Back Front Back Front Back SL-HORG1 72 72 36 36 72 72 SNAP IN WIRE RETAINER SL-VORG1 240 240 135 135 624 624 IS INCLUDED IN THE VERTICAL SL-VORG2 240 240 135 135 624 624 PANEL KITS. Note: Duct based on 40% Fill Capacity Page 1 of 2 ORTRONICS 125 Eugene O'Neil Drive I New London,CT 063201 Phone:86O 44.5-3800 I Fax 860-405-2970 Patch Panels Part Number: OR-PHD5E6U24 Description:Clarity5E 24-port panel,Cat 5e, high density,six-port modules,19"x 1.75" Clarity5E 24-Port High Density Patch Panel is component compliant to EIArrIA Category 5e performance requirements.It occupies one rack unit and measures 19"x 1.75".Jacks are grouped in six-port modules.Part of the Clarity5E link and channel solution that provides significant installed performance headroom Specifications Performance Rating Category 5e Panel or Accessory Type Mod8/110 Mod Jack Wiring Universal T568 A/B Number of Ports 24 Critical Size 1 rack unit Color Black with green print Width 19 in(482.6 mm) Depth .125 in(3.175 mm) Height 1.75 in(44.45 mm) Cable Diameter Range 22-26 AWG UL Listing No. E131600 UL Standard UL 1863 CUL Listing No. E131600 CUL Standard UL 1863 FCC Standard Part 68 ETL Listing No. 3013270-004 ETL Standard TIA/EIA-568-B.2 Labeling Options LabelMo Part No.&Sheet Size 70400408,'8.5"x 11" Label Size 3.74"x.392" No.Labels/Sheet 26 No.Sheets/Bag 10 Brady Part No. LAT-43-7070.375 x 2.87 Label Construction Material Finish/Plating Panel .094"Aluminum Painted black texture with green silkscreen Six-port jack housing High impact thermoplastic UL 94V-0 Six-port rear IDC housing Polycarbonate Array of eight modular contacts Nickel plating and a minimum of 50 micro (staggered) Phosphor Bronze inches of selective gold plating in contact area IDC contacts(low noise) Phosphor Bronze Nickel plating and tin lead over plate Printed circuit board Two-sided FRA epoxy resin/glass base with solder mask Front bezel/rear designation housing ABS UL94V-0 Rear wire management bar 0.32"x 0.125"Cold rolled steel,round Painted black-no texture http://ortronics.smartcats.com/ortronics/sc_app/sc_specsheet.asp?famID=1090&vid=0,0,0,0... 4/5/2004 Page 2 of 2 I edge flat wire I I Features Benefits • ETL verified to TIA Category 5e component spec • Elevated component performance • Center tuned to Clarity5E patch cords • More transparent mated union • Universal wiring • Supports T568A and T568B installs • Easy lace 110 termination • Saves installation time • Supplied rear cable management • Supports good cabling practice • High density design • Maximizes rack utilization Related Products TJ5e Series Category 5e TracJacks,S215e and S225e Category 5e Series II Modules,MC5e Series of Category 5e Patch Cords, 110ABC5e Series of Category 5e 110 Blocks, Mighty Mo 3 Cable Management Racks ©Ortronics,2003 http://ortronics.smartcats.com/ortronics/sc_app/sc_specshect.asp?famlD=1090&vid=0,0,0,0... 4/5/2004 Page 1 of 1 125 Eugene O'Neil Drhm I New London,CT 063201 Phone:860445-38001 Fax:860-405-2970 Product Family:Cable Management Panels Part Number: OR-60400131 Description:Cable Management Panel,five horizontal distribution rings 1.7"H x 3.5"D,1 rack unit(1.75"x 19"),black Specifications Family Cable Management Panels Product Standard Color Black Width(Imp/Metric) 19"(483 mm) Depth(Imp/Metric) 3.5"(89 mm) Height(Imp/Metric) 1.72"(44 mm) Features Benefits • Provides organized management of patch cables • Eliminates congestion around equipment and manages horizontally patch cables • Rings made out of steel • Sturdy and durable • Maximum ring fill capacity using Category 6 cable • Effectively manages 24-port patch panels is 60 cables ©Ortronics,2003 http://ortronics.smartcats.com/ortronics/sc_app/sc_specsheet.asp?famID=103030&vid=0,0,... 4/5/2004 S110 Wiring Blocks - Siemon Pagel of 2 F9IEM0Iv The Siemon Company Siemon Business Park 27 Siemon Company Drive Watertown, CT 06795-0400 USA Tel:(1) 860.945.4200 Fax: (1) 860.945.4225 S110 Wiring Blocks V4. Click on photo to enlarge Siemon S110 field termination kits combine category 5e performance with unparalleled installation features. Each kit includes adequate connecting blocks to complete each 25-pair termination strip on the S 110 wiring block (e.g. S 110AB2-100FT includes five 4-pair and one 5-pair connecting block per 25-pair termination strip, or a total of twenty 4-pair and four 5-pair connecting blocks). PATENTED Features . Ideal for use in cross-connect and consolidation point applications . Rugged high impact, flame-retardant polycarbonate ■ Detachable mounting legs ■ Termination strips on the base are marked in 5-pair increments. Connecting blocks are color- coded ■ S 110 Blocks mated to S 110P4 Patch Plugs deliver component and channel performance to 160 MHz.* http://www.siemon.com/e-catalog/products/S 110_Wiring_B locks.asp?print=YES 4/5/2004 S110 Wiring Blocks - Siemon Page 2 of 2 } Patented openings between rows allow horizontal cables to be routed from behind the panel and enter the block from the rear, helping to maintain cable geometry and cable jacket up to the point of termination ensuring optimum category 5e performance. Another patented Siemon innovation allows 50- and 100-pair wiring blocks to be detached from their mounting legs providing easy access to cables before, during or after installation. ro ;{1 Designation strips with interchangeable colored labels can be mounted in the center and/or outside positions of the wiring block. ©1995-2004 Siemon r---- Googie�Site_5tats http://www.siemon.com/e-catalog/products/S 110_Wiring_B locks.asp?print=YES 4/5/2004 Closet Connector Housings Corning (CCH-02U & CCH-01U) Cable Systems flutions Product Applications • Corning Cable Systems'Closet Connector Housings (CCHs)provide interconnect or cross-connect capabilities between the outside plant,riser,or distribution cables,and the opto-electronics. Description The units can be rack-mounted in 19-in(48 cm)or 23-in (58 cm)equipment racks(1.75-in EIA hole spacing)and are available in one rack space(two connector panels)or two rack spaces(four panels). Closet Connector Housings can be ordered with connector panels for multimode and single-mode applications. Con- nector panels are offered in 6-, 8-, 12-, 16-and 24-fiber con- figurations. Documentation labels are provided and units or Closet Connector Housings(CCH•02U and CCH-01U) Photo CPC71 components can be added as needed to construct a fiber distribution frame for any application. Features / Benefits • Ideal for field connectorization • Suitable for loose tube, tight-buffered and optical fiber ribbon cables • Mounting configurations include standard 4.5-in(11.4 cm) co frontal projection,partially flush and flush mount • Multiple locations for jumper egress CCH-02U(up to 96 fibers) Drawing CPC-220/5/3 • Accepts CCH connector panels or modules Note.One"U"_one indnrtry-standard rack • Slide-out drawer for easy connector access spare of 1.75 inches. • Lock can be field-installed • Meets requirements of ANSUITA/EIA-568A and 606 • Brackets included for rack mounting in 19-in or 23-in u equipment racks 02� 0 a• CCH-01U(up to 48 fibers)I Drawing CPC-220/5/4 CORNING Product Specifications Closet Connector Housings Corning (CCH-02U & CCH-01U) Cable systems A L ANscape' Solutions Product Specifications Dimensions(H x W x D) Shipping Weight Part Number cm(in) kg(Ib) CCH-01U 4.4 x 43.2 x 30.5 (1.75 x 17 x 12) 2.3 (5) CCH-02U 8.9 x 43.2 x 30.5(3.5 x 17 x 12) 2.7(6) Ordering Information Part Number Description CCH-01U Closet Connector Housing that will accept up to two CCH panels; comes with blank panels and hardware to strain-relieve one cable with the UCC or up to five 0.4-in or smaller cables with the UCC insert; two 6-fiber panels= 12 fiber total capacity; two 8-fiber panels= 16 fiber total capacity; two 12-fiber panels=24 fiber total capacity; two 16-fiber panels=32 fiber total capacity; two 24-fiber panels=48 fiber total capacity(MT-RJ and LC) CCH-02U Closet Connector Housing that will accept up to four CCH panels; comes with blank panels and hardware to strain-relieve one cable with the UCC or up to five 0.4-in or smaller cables with the UCC insert; four 6-fiber panels=24 fiber total capacity; four 8-fiber panels= 32 fiber total capacity; four 12-fiber panels=48 fiber total capacity; four 16-fiber panels=64 fiber total capacity; four 24-fiber panels=96 fiber total capacity(MT-RJ and LC) Pre-Loaded Housings CCH-OIU-2491 CCH-01U preloaded with 12 568SC(SC duplex)adapters(two CCH panels),62.5 pm MM, composite insert,composite housing CCH-OIU-2497 CCH-0IU preloaded with 12 MT-RJ adapters(two CCH panels), 62.5 pm MM,composite housing CCH-OIU-1215T CCH-01U preloaded with 12 ST*compatible adapters(two CCH panels), 62.5 pm MM, ceramic insert,composite housing Accessories CCH-lU-LBL Replacement Label Kit for the CCH housing(I-rack-space housing);contains 10 labels CCH-2U-LBL Replacement Label Kit for the CCH housing(2-rack-space housing);contains 10 labels CCH-WALLMNT-KIT Bracket Kit for wall mounting the CCH housing,6 rack spaces tall,hinged CCH-UCC-KIT One Bracket and Two Universal Cable Clamps(UCCs);each housing is shipped with one bracket and two UCCs;an additional bracket and UCC can be added CJP-OlU Closet Jumper Management Panel;provides jumper management in a 1.75-in rack space CJP-02U Closet Jumper Management Panel;provides jumper management in a 3.5-in rack space HDWR-LOCK-KIT Lock Kit for front door of housing;contains one lock with two keys FDC-CABLE-GRND Armored Cable Grounding Kit;contains armor grounding clip and ground strap Connector Panels and Modules Must be ordered separately Corning Cable Systems U.0•PO Box 489•Hickory,NC 28603-0489 USA 1-800-743-2675•rAX:+1-828-901-5973•International:+t-8a8yot-500o•http://www.corning.com/Cablesystems Corning Cable Systems reserves the right to improve,enhance and modify the features and specifications of Corning Cable Systems'products without prior notification.LANscape is a registered trademark of Corning Cable Systems Brands,Inc.Discovering Beyond Imagination is a trade- mark of Corning Incorporated.ST is a registered trademark of Lucent Technologies.All other trademarks are the properties of their respective owners.Corning Cable Systems is ISO goof certified.0 rggg,xoo3 Corning Cable Systems.All rights reserved.Published in the USA LAN-236-EN/March 2003/pdf CORNING ' nbe OMYrs&b luhatieNebwmlu *PICO MACOM° 4nF j ,, rE Aca � vroo ra w". tfP'.q(r N 0 M NYCE RV Broadband 54-1000MHz frequen- cy range(Channels CAN 2-135) 30dB gain for optimal carrier-to- noise ratio and superior picture quality > ± 0.5dB flatness across band provides low distortion and excellent frequency response Employs state-of-the art hybrid push-pull technology for distor- tion-free audio-video quality CA30RKI " Adjustable slope and gain con- 1 GHz Broadband Push-Pull Headend Amplifier trols for easy system balancing The Pico Macom CA30RK1000 is a professional re-broadcast grade push-pull Front panel controls and test amplifier producing signals with extreme) low noise and harmonic distortion. point enable easy setup and p p g g y monitoring The amplifier is capable of 135 channel operation over the 54-1000MHz range. Double shielded enclosure pro- This rack-mounted amplifier makes an excellent headend launch amplifier and is vides over 95dB RFI shielding frequently used in conjunction with Pico Macom's passive headend combiners performance reducing leakage (PHC12G or PHC24G)to overcome losses associated with signal combining in and ingress broadband CAN systems. Also, the CA30RK1000 is ideally suited for amplify- Built-in lightning and line volt- ing the cable input prior to Pico Macom's CEF channel elimination filter in age surge protection protects` applications requiring mix-and-match"channel applications or those requiring the unit from damage PP q g u pp local insertion. Pico Macom backs up this product with its industry leading Also available in a wall mount 5-year limited warranty. version as CA30-1000 " Distribution Amplifier 40001PIC0 EMACOM - Drive San Fernando, CA 91340 A-57 ;'.a www.picomacom.com - - : -• Product Specifications J PICO MACOM it I oleo + CA-30RKI OW DISTRIBUTION AMPLIFIER PICO A•ACOM O pICO � O w®w Front View 0 © O G O G 0 Rear View RF General Bandwidth: 54-1000 MHz Power Input: 115 VAC,60 Hz,4 W Gain: 30 dB Operating Temperature: -10'to+50°C Gain Adjust Range: 12 dB Dimensions: 19-(L)x 3-(D)x 1314-(H) Slope: 9 dB Weight: 3.8 lbs. Flatness: t 1.5 dB(54-1000 MHz) Test Points: -20 dB Max.Output(@ Max.Slope) 45 dB(54 channels,-57 dB cross modulation) Noise Figure: 7.5 dB Ordering Information Second Order Beats: -60 dB(129 channels @ 13 dBmV input level) Composite Triple Beat: -58 dB(129 channels @ CA-30RKI000 13 dBmV input level) Cross Modulation: -62 dB(129 channels @ 13 dBmV input level) Return Loss In: >20 dB to 800 MHz Return Loss Out: >12 dB to 800-1000 MHz Channel Loading Specifications Total#of Max.Input Max.Output Level Channels Level @ Max Slope .,. - - ;• 7 44 dBmV 66 dBmV '* 12 41 dBmV 63 dBmV a 36 32 dBmV 54 dBmV 54 23 dBmV 45 dBmV 78 18 dBmV 40 dBmV 108 14 dBmV 36 dBmV 125 11 dBmV 32 dBmV 158 8 dBmV 30 dBmV Specifications Subject to Change ®Copyright 2003 Pico Macom,Inc. - *PICO Drive San Fernando, CA 91340 A EMACOM"� • Free: www.picomacom.com • • PICO MACOM At Mao WA Economy A/B Slide Switch Cost effective A/B Switch-Switches between 2 input sources-Bandwidth 5-900MHz- TRU�/�PEC- Impedance 75-Ohm-Isolation 40-60dB-Return loss 13-20dB min-Insertion loss<1dB-DC Power Passing-Zinc-Plated Heavy-Duty Diecast Housing-Machined F Connector Ports- Hardware and Double Adhesive Pad Included y,. Wlr High Isolation A/B Toggle Switch High Reliability A/B Switch-Switches between 2 input sources-Rugged Positive-Action Lever- �S ECEC'" Bandwidth 5-1000MHz-Impedance 75-Ohm-High Isolation 60-90dB-Return loss 15-20d8011P min-Insertion loss<0.1dB-DC Power Passing-ABS Plastic-Covered Zinc Diecast Housing- Machined F Connector Ports-Mounting Screws Included High Isolation AM Front Push-Button Switch High Performance A/B Switch-Switches between 2 input sources-Front-Panel Push-Buttons- SPECn Bandwidth 5-1000MHz-Impedance 75-Ohm-High Isolation 60-90dB-Return loss 15-20dB " °"R-11 °'"'°"'""' min-Insertion loss<0.1dB-DC Power Passing-ABS Plastic-Covered Zinc Diecast Housing- Machined F Connector Ports-Mounting Screws Included High Isolation AM Top Push-Button Switch • High Performance A/B Switch—Switches between 2 input sources—Front-Panel Push-Buttons— *SPEC'" Bandwidth 5-1750MHz—Impedance 75-Ohm—High Isolation 60-90dB—Return loss 15-20d6 min—Insertion loss<0.1dB—DC Power Passing—ABS Plastic-Covered Zinc Diecast Housing— Machined F Connector Ports—Mounting Screws Included +PICO � EMACOM d Drive Fernando, do 91340 0 www.picomacom.com : •• : •• ��PICO MACOM° - _ Series MCO MACOM ■Gi�1 WAR NTY Broadband 165-Channel Range 5-1000 MHz r ` (CATV 2-158, T7-T 13) Available in 12-channel (PHC 12G) or 24-channel (PHC24G)configurations for cost-effective deployment PHCSeries Directional coupler design and low insertion loss provide 1 GHz Broadband Passive Headend Combiners improved carrier-to-noise, sys- tem performance and picture The Pico Macom PHC12G and PHC24G are professional re-broadcast grade quality rack-mounted high-isolation passive headend signal combiners available in 12 High -30dB port-to-port isolation and 24 channel configurations respectively.These units combine the outputs provides spurious carrier rejec- from multiple modulators and processors into a single common broadband tion and minimizes un-desired ' Y channel interaction, thereby output.The high quality directional coupler design enables high isolation reducing picture distortion between input ports, providing minimum interaction between digital and/or ana- Passive design allows full log input sources.Also, low insertion-loss ensures optimum carrier-to-noise ratio bi-directional flexibility for and superior picture quality.The passive design of the PHC12G and PHC24G two-way digital and analog requirements combiners make them ideally ona suited for bi-directional applications, such as cable modems, remote audio/video origination, or other applications where remote Idea!as a rack-mounted headend distribution signal origination is returned to the headend. Both units can also serve as high splitter/combiner network quality rack-mounted high-isolation distribution splitter networks. Pico Macom -20 dB test port provides con- backs up this product with its industry leading 5-year limited warranty. � venient access for headend testing and system monitoring 4 PICO EMACOM A - - www.picomacom.com : -• - - - : -• Product Specifications WPICO MACOM Series ® PHC-12G PASSIVE NEADEND COM M/ER PICO MACOM O °x Front View O G G G �' 1'• sa.esr run O O G' G G G Rear View PHC-12G i, O G run rvn C Rear View PHC-24G Specifications Ordering Information Frequency Range: 5-1000 MHz PHC-12G 12 Channel t t :: Port-to-Port Isolation: Adjacent Ports 30 dB typical PHC-24G 24 Channel Opposite Ports 40 dB typical Insertion Loss: PHC-12G -18 dB typical PHC-24G -21 dB typical Mounting: 19-Rack Finish: Blade Matte Dimensions: 19-(L)x 3-(D)x 13/4"(H) Weight: PHC-12G 2.5lbs. PHC-24G 3.3 lbs. 5 4 Connectors: All"F"type Test Point: -20 dB A; Specifications Subject to Change O Copyright 2003 Pico Macom,Inc - .- Fernando, PICO EN COMPANY MACOM R' • • - : • 818-493-4433 www.picomacom.com LOOSE OPTIC ► Singlemode, Multi-mode and GIGAIite'" ► Outdoor/Indoor Berk-Tek A NEXANS COMPANY ► Riser and Plenum Rated www.berktek.com T 1-800-237-5835 Berk-TeKs revolutionary Outdoor/Indoor BUFFER TUBE CONSTRUCTION FEATURES ADVENTUM'cables are designed to be used DryGel' blocked color coded loose Designed to support Gigabit Ethernet, in riser and plenum rated environments. tubes containing up to 12, 250 pm, Gigabit ATM,Fibre Channel and other ADVENTUM supports the latest Gigabit Communications Protocols,including Gigabit individually colored fibers. high-speed applications Ethernet and ATM.This cable design utilizes ' Riser or plenum rating enables installation Berk-TeKs unique DryGel"'waterblocking STANDARDS to go directly from outride plant to riser n shaft with system. DryGel"'technology utilizes super International ISO/IEC 11901 transition points absorbent polymers to replace the messy European EN 50173 Cable Core and Buffer Tubes use DryGet' gel filler inside the fiber tubes.It is the North American Telecordia GR-409&GR-20 water blocking system ' All dielectric design only fire-rated cable designed to withstand EIA/rIA-5688 the rigors of the outside plant environment. ICEA S-104-696& BENEFITS ADVENTUM is rated for riser and plenum ANSI/ICEA S-87-640 installations and has no get filler. ETL, UL Compact,water blocked,plenum or riser OFNR/FT4 rated,flexible loose tube design of all Berk-TeKs loose tube cable design can be OFNP/FT6 dielectric construction allows for iristalla- used in all typical campus and outdoor/ tion in any outride plant to riser shaft indoor installations,and is available APPLICATIONS with no transition point with standard multimode,singlemode and Berk-TeKs ADVENTUM Loose Tube, Riser ' No cleaning of gels required for installation, GIGAIite'" fibers.This design affords the Rated,or Plenum Rated fiber optic cable is greatly reducing installation time and cost installer the ability to place cable anywhere Transition points in network are not needed li in a network, bypassing the traditional tran- tioninte,including:for all high speed data applica System grounding requirements are sition points required in most installations. ons, eliminated ADVENTUM Riser cable is available in two IEEE 802.3 FOIRL 10 Mb/s to 144 count fiber constructions.These IEEE 802.3 10BASE-F 10 Mb/s TEMPERATURE RATING cables have been thoroughly tested in accordance with Telcordia GR-20,ICEA-640, IEEE 802.3 10006ASE-SX/lX 1000/s IEEE 802.3 lOGBASE-X 10 OPERATION -40°C to +75•C Mb and ICEA-696 standards where applicable. STORAGE -40•c to +85•C FDDI 100 /s PLENUM ATM 155 Mb/s INSTALLATION)>12Fbers) -20•C to +60•C 622 Mb/s PLENUM 1.2/2.4 Gb/s INSTALLATION O•C to +60•C Fibre Channel FC-PH 1.062 Gb/s RISE R INSTALLATION -20•C to +60•C Corporate Headquarters:132 White Oak Road,New Holland,PA 17557 USA Canada Sales Office:140 Allstate Parkway,Markham,Ontario L3R OV Canada LOOSE OPTIC CENTRALSTRENGTH OPTICAL FIBER _ MEMBER BerkTek WATER-BLOCKED TH DRYGEL WATER-BLOCKED DRY GEL 1HERMRM BLOCKED 0 PLASTIC TUBE THERMO PLASTIC TUBE 0.0-1 °p OPTICAL FIBER A NEXANS COMPANY imp$ STRENGTH ELEMENT STRENGTH MEMBERS www.berktek.com �i RIPCORD BINDER STRENGTH ELEMENT g 1-800-237-5835 FUME RETARDANT RIPCORD JACKET FUME RETARDANT JACKET RISER SPECS PART NUMBER SELECTION GUIDE 2-12 fiber tensile strength to 300 lbs. Select the product prefix corresponding for installation to the cable configuration and quantity 18-144 fiber tensile strength to 600 lbs. of fibers you desire,in Table A. for installation Then choose the products suffix corre- ► These cables offer the highest packing sponding to the type of fiber you desire, density of loose tube cables in a riser in Table B. rated design Example: LTRO12-CB3510/25 • Designed to stand up to rigors of the - outside plant environment ► Easy to terminate RISER RATED TECHNICAL DATA-PHYSICAL (TABLE A) FIBERS PRODUCT PREFIX DIAMETER WEIGHT MIN. BEND RADIUS MAX. LOADING INSTALL LONG TERM INSTALL LONG TERM in. mm Ux/kft. k9/km in. cm in. cm Lb. N UI. N 2 LTRO02 0.255 6.5 30 45 3.8 9.7 2.6 6.5 300 1335 90 400 4 LTRO04 0.255 6.5 30 45 3.8 9.7 2.6 6.5 300 1335 90 400 6 LTRO06 0.255 6.5 30 45 3.8 9.7 2.6 6.5 300 1335 90 400 8 LTRO08 0.255 6.5 30 45 3.8 9.7 2.6 6.5 300 1335 90 400 12 LTRO12 0.255 6.5 30 45 3.8 9.7 2.6 6.5 3DO 1335 90 400 18 LTR12BO18 0.467 11.9 89 132 7.0 17.8 4.7 11.9 600 2670 200 890 24 LTR12BO24 - 0.467 11.9 89 132 7.0 17.8 4.7 11.9 600 2670 200 890 36 LTR12BO36 0.467 11.9 89 132 7.0 17.8 4.7 11.9 600 2670 200 890 48 LTR12BO48 0.467 11.9 89 132 7.0 17.8 4.7 11.9 600 2670 200 890 60 LTR12BO60 0.467 11.9 89 132 7.0 17.8 4.7 11.9 600 2670 200 890 72 LTR128072 0.467 11.9 89 132 7.0 17.8 4.7 11.9 600 2670 200 890 84 LTR12BO84 0.510 13.0 115 171 7.7 19.4 5.1 13.0 600 2670 200 890 96 LTR128096 0.541 13.7 138 205 8.1 20.6 5.4 13.7 600 2670 200 890 108 LTRI28108 0.591 15.0 154 229 8.9 22.5 5.9 15.0 600 2670 200 890 120 LTRI28120 0.636 16.2 175 260 9.5 24.2 6.4 16.2 600 2670 200 890 132 LTR128132 0.672 17.1 198 295 10.1 25.6 6.7 17.1 600 2670 200 890 144 LTR12BI44 0.713 18.1 226 336 10.7 27.2 7.1 18.1 600 2670 200 890 Fuses Raft ORWFT4.Saaalk blade,riser rated.IN 29stan1.radmLaO Reels Corporate Headquarters:132 White Oak Road,New Holland,PA 17557 USA Canada Sales Office:140 Allstate Parkway,Markham,Ontario L3R O27 Canada 't LOOSE TUBE FIBER OPTIC CABLE ADVENTUM CENTRALSTRENGTH OPTICAL FIBER MEMBER DRYGEL DRYGEL WATER-BLOCKED THERMO PLASTIC LOCKED BerkTek THERMO PLASTIC TUBE 13.0 mm) OPTICAL FIBER A NEXANS COMPANY & JACKET STRENGTH ELEMENT STRENGTHMEMBERS d� BINDERwww.berktek.com RIPCORDSTRENGTH ELEMENT �' 1-800-237-5835 FLAME RETARDANT RIPCORD FLAME RETARDANT JACKET FIBER TECHNICAL DATA (MULTIMODE) (TABLE B) WAVELENGTH MAXIMUM BANDWIDTH LENGTH FIBER TYPE FIBER SUFFIX (nm) ATTENUATION(dB/km) (MHz/km) (METERS @ 850-1300 nm) 62.5/125 pm-Standard C83510/25 850/1300 3.5/1.0 200/500' 1 GbE-300/600 62.5/125 pm-GIGAHte" GB3510/25 850/1300 3.5/1.0 200/500" 1 GbE-500/10DO 50/125 pm-GIGAUte' L83515/55 850/1300 3.5/1.5 500/500" 1 GbE-600/2OD0 50/125 pm-GIGA1ite SO EB3515/25 850/1300 3.5/1.5 2000"'/500' 10 GbE-300/300 1 GbE-1000/550 Canlact arslarrmX service Ion mole v*m bw OOmNad BwdAWM Meannine It per EW FOrP 204-Pragaph 32.1.••Resoxed Mode lands per EN FOIP 204-Pampa 32.2•••DdwmYj l Mode Debi pr EW FUW-220 DMD Ted Meaame nat FIBER TECHNICAL DATA (SINGLEMODE) (TABLE B) WAVELENGTH MAXIMUM BANDWIDTH LENGTH FIBER TYPE FIBER SUFFIX (nm) ATTENUATION(dB/km) (MHz/km) (METERS @ 1300 nm) Standard for loose tube AB0504 1310/1550 0.5/0.4' NA I GbE-5km Standard for Interconnect A80707 1310/1550 0.7/0.7 NA NA (IC,MC and RD) Standard for Premise Distribution AB1010 1310/1550 1.0/1.0 NA 1 GbE-5km 'DdI&W Amu~varmes aedM*.Car 1,9D" rl TE1L Adventum cables meet the most stringent CRITICAL DESIGN PERFORMANCE AND COMPLIANCE DIFFERENCES requirements set forth in the industry standards for cables installed in an STANDARD OUTDOOR OR INDOOR ADVENTUM" TIGHT BUFFERED outdoor environment.These inctude COMPLIANCE COMPLIANCE TIA/EIA,ANSI/ICEA,and Telcordia TIA/EIA-568-B.3(4.3.1) Indoor Yes Yes standards which have been referenced Telcordia GR-409 Indoor Yes Yes in the table on the right. ANSI/ICEA S-83-596 Indoor Yes Yes ANSI/ICEA S-104-696 OutdDor/Indoor Yes No TIA/EIA-568-B.3(4.3.2) Outdoor Yes No Telcordia GR-20 Outdoor Yes No ANSI/ICEA S-87-640 Outdoor Yes No Fm more nAormaaan please vzo ou weWft nwwlmrllk a� Corporate Headquarters:132 White Oak Road,New Holland,PA 17557 USA Canada Sales Office:140 Allstate Parkway,Markham,Ontario L3R 027 Canada ADVENDS 06/03 UniCam® Multimode Connectors Corning A LAi�IScape Solutions Product Cable Systems Applications '.s • Main cross-connect,intermediate cross-connect,horizontal a i cross-connect and workstation • Maintenance and restoration of building cable • Ideal for fiber-to-the-desktop applications where installation .. setup and teardown time is critical Description The UniCam®Connector is the ideal solution for all your =r field-installable multimode fiber optic connector require- ments.The quick installation reduces the total installed cost of connectorization, making the UniCam Connector cost- effective for all fiber applications, from the main cross-connect UniCam MT ru,FC,SC,sT•Compatible and LC Multimode Connectors �Photo LAN295 to the workstation. The UniCam LC Connector is the latest addition to the UniCam Connector family.A small-form-factor connector Factory- half the size of the SC, the UniCam LC Connector doubles Polished Field Fiber End-face the density of the SC connector. The UniCam Connector can best be described as a mini pigtail. It incorporates a factory-installed fiber stub that is Fiber Stub Mechanical Splice with Index Matching Gel fully bonded in the ferrule.The other end is precisely cleaved and placed into the patented alignment mechanism of a mechanical splice. Both the field fiber and fiber stub are fully UnlCam Multimode Connector Cross-Section drawing cvc-12oi3n protected from environmental factors. Unlike other no-epoxy, field-installable connectors, the UniCam Connector requires no polishing. Features/ Benefits • No epoxy or polishing • Minimal tool kit, reduced setup time;universal assembly tool terminates all single-and 2-fiber • Compliant with ANSI/TWEIA-568-11.3 UniCam Connector styles • Economical cost for all fiber terminations • Two LC or MT-RJ connectors fit in the same space as the SC connector • Fastest termination time in the industry • LC is springless, "junior"version • Low labor and no consumables for reduced total cost • Eliminates unnecessary cable slack and storage CORNING a� e ayo�a i,Ne�am Product Specifications UniCam® Multimode Connectors Corning A LI ANscape Sulutions Produc Cable Systems Specifications Parameter Description Intermateability Connectors are FOCIS compliant with TLVEIA 604-2 (ST'compatible),604-3 (SC), 604-10A(LC),604-4(FC)and 604-12 (MT-RJ) Insertion Loss 0.3 dB average,FOTP-171 Durability <_0.2 dB change,500 rematings,FOTP-21 Tensile Strength 10 lb<_0.2 dB change;0.5 lb S 0.2 dB change for LC Temperature Cycling _<0.3 dB change,-40 to+75°C;21 cycles Nominal Fiber OD 125 pm Materials Ferrule: Composite or ceramic Housing: Composite Reflectance -20 dB minimum Ordering Information Part Number Description 95-000-40 UniCam®SC Multimode Connector for 62.5 pm fiber with composite ferrule 95-000-41 UniCam SC Multimode Connector for 62.5 pun fiber with ceramic ferrule 95-050-41 UniCam SC Multimode Connector for standard SO pun fiber with ceramic ferrule 95-050-41-X UniCam SC Multimode Connector for laser-optimized 50 pun multimode fiber with ceramic ferrule 95-000-50 UniCam ST Compatible Multimode Connector for 62.5 pun fiber with composite ferrule 95-000-51 UniCam ST Compatible Multimode Connector for 62.5 pun fiber with ceramic ferrule 95-050-51 UniCam ST Compatible Multimode Connector for standard 50 pun fiber with ceramic ferrule 95-050-51-X UniCam ST Compatible Multimode Connector for laser-optimized 50 pun multimode fiber with ceramic ferrule 95-000-61 UniCam FC Multimode Connector for 62.5 pun fiber with ceramic ferrule 95-000-98 UniCam LC Multimode Connector for 62.5 pun fiber with ceramic ferrule,springless 95-050-98 UniCam LC Multimode Connector for standard 50 pun fiber with ceramic ferrule,springless 95-050-98-X UniCam LC Multimode Connector for laser-optimized 50 pm multimode fiber with ceramic ferrule 92-001-97-P-E UniCam MT-RJ Multimode Connector with pins for 62.5 pun fiber 92-001-97-NP-E UniCam MT-RJ Multimode Connector without pins for 62.5 pun fiber 92-051-97-P-E UniCam MT-RJ Multimode Connector with pins for standard 50 pm fiber 92-051-97-NP-E UniCam MT-RJ Multimode Connector without pins for standard 50 pun fiber 92-051-97-P-E-X UniCam MT-RJ Multimode Connector with pins for laser-optimized 50 pun multimode fiber 92-051-97-NP-E-X UniCam MT-RJ Multimode Connector without pins for laser-optimized 50 pm multimode fiber CORNING a,me.h,.hond xnagi—on de fobw Ca"SaWtl la Remw Nelwwb • UniCam® Multimode Connectors Corning A LAtiscape" So ut,ons Product Cable Systems Ordering Information (continued) Accessories Part Number Description TKT-UNICAM Basic Installation Kit for single-fiber and 2-fiber UniCam®Connectors, terminates single-fiber ST*compatible,SC,LC,and FC,as well as 2-fiber UniCam MT-RJ Connectors;includes FBC-001 Score and Snap cleaver TKT-UNICAM-CTS TKT-UNICAM plus splitter box,tool adapters and patch cords needed to add Continuity Test Set(CTS)functionality;visual fault locator not included TKT-UNICAM-ELITE Premium Installation Kit;consists of TKT-UNICAM-CTS with high-performance FBC-012 cleaver;includes single-and two-fiber handlers,visual fault locator and connector cleaning cassette;recommended for single-mode applications; does not include FBC-001 cleaver TEST-UNICAM-CTS Converts an existing TKT-UNICAM kit to add the Continuity Test Set(CTS)option; contains splitter box,SC,ST compatible,LC and MT-RJ CTS adapters and jumpers TKT-012-2F High-performance FBC-012 Cleaver with 1-and 2-fiber handlers FBC-001 Score and Snap Cleaver TL-UC01 Elite UniCam Connector Installation Tool;terminates UniCam ST Compatible, SC,LC,FC and MT-RJ Single-mode and Multimode Connectors TER-CTS-MTRJ CTS Adapter for UniCam MT-RJ Connectors TER-CTS-SC CTS Adapter for UniCam SC Connectors TER-CTS-ST CTS Adapter for UniCam ST Compatible Connectors TER-CTS-LC CTS Adapter for UniCam LC Connectors VFL-350 Visual Fault Locator,635 nm penlight style 58610IR3131001M Jumper,ST compatible to SC single-mode and multimode, 1 in long (for VFL-to-CTS splitter box and UniCam ST compatible or SC Connectors) 589802R1110001M Jumper,SC to MT-RJ single-mode and multimode, I m long (for CTS splitter box-to-UniCam Connector Installation Tool) 95-400-03-BP SC Duplex Clip(100 per pack) 2104359-01 Universal Connector Cleaning Cassette,cleans pinned and pinless connectors with ferrules TRIGGER-BP-D Trigger/Duplexing Clip for UniCam LC Connectors(100 per pack) 026101R2131001M Jumper,LC to ST compatible single-mode and multimode, 1 in long (for VFL-to-UniCam LC Connector) 588702RJ131001M Jumper,SC to MT-RJ(pinned)single-mode and multimode, 1 m long (for CTS splitter box-to-UniCam Connector Installation Tool) CORNING — ; FsW Ca"Sakfv fa hm NeMalu UniCam® Multimode Connectors Corning Cable Systems Corning Cable Systems LLC•PO Box 489•Hickory,NC 28603-0489 USA 1-800-743-2675•FAX:+t-828-901-5973•International:+t-828-got-5000•http://www.corning.com/cablesystems Corning Cable Systems reserves the right to improve,enhance and modify thefeatures and specifications of Corning Cable Systems'products without prior notification.LANscape and UniCam are registered trademarks of Corning Cable Systems Brands,Inc.Discovering Beyond Imagination is a trademark of Corning Incorporated.ST is a registered trademark of Lucent Technologies.All other trademarks are the properties of their respective owners.Corning Cable Systems is 150 9oos certified.0 zoor,2003 Corning Cable Systems.All rights reserved.Published in the USA LAN-117-EN/April 2003/pdf CORNING OMmerinr BeyoM Imag,vrian �� hlb Ca.j Sd b—hw P—Nv .,ks r • Single-Tube Cable Fan-Out Kits Corning A LANscape Solutions NrodUCI. Cable Systems Applications • Field connectorization of MCS®Road Cables • Field connectorization of single-tube cables containing individual fibers or bundles of fibers Description Corning Cable Systems' Single-Tube Cable Fan-Out Kits assist in field-terminating connectors on single-tube cables. Attaching to the jacket and strength elements of single-tube cables, this kit branches out the single bundle of fibers into up to five tubes containing smaller bundles of fibers.The smaller bundles can be further divided into single fibers using buffer tube fan-out kits. Single-Tube Fan-Out Kit Installed on MCS Road Cable with Buffer Tube Fan-Out Kits Photo LAN364 The kit contains a funnel that transitions one tube of fibers into up to five smaller tubes of fibers. It contains the smaller tubing,heat-shrink tubing and installation instructions. Buffer tube fan-out kits are purchased separately. Features / Benefits • Funnel provides secure fiber transition points • Protects optical fibers from tensile strain • Attaches securely to cable jacket • Used in conjunction with buffer tube fan-out kits for field termination of cables CORNING Product Specifications Single-Tube Cable Fan-Out Kits Corning A LAMcipe Sulutit3ns i-ruauct Cable Systems Specifications Dimensions(H x W x D) 13 x 18 x 25 cm(5 x 7 x 10 in) Shipping Weight 2.3 kg((5 lb) Ordering Information Part Number Description EST-END-01-SM Single-Tube Cable Fan-Out Kit for single-mode cable;contains funnel,yellow branch tubing, transition heat-shrinks and installation instructions EST-END-01-MM Single-Tube Cable Fan-Out Kit for multimode cable;contains funnel,orange branch tubing, transition heat-shrinks and installation instructions Accessories FAN-BT25-06 Buffer Tube Fan-Out Kit with six 25-in-long 900 pm tubes FAN-BT25-12 Buffer Tube Fan-Out Kit with twelve 25-in-long 900 pm tubes Corning Cable Systems LLC•PO Box 489•Hickory,NC 28603-0489 USA 11-800143-2675•FAX:+t-8a8-got-5973•International:+t-828-got-5000•http://www.corning.com/cablesystems Corning Cable Systems reserves the right to improve,enhance and modify the features and specifications of Corning Cable Systems'products without prior notification.LANscape,MCS and UniCam are registered trademarks of Corning Cable Systems Brands,Inc.Discovering Beyond Imagination is a trademark of Corning Incorporated.All other trademarks are the properties of their respective owners.Corning Cable Systems is ISO Soot certified.m 2003 Corning Cable Systems.All rights reserved.Published in the USA.LAN-StS-EN/March 2003/Pdf CORNING Dixwerinr leynnd ImaPnat'ion Y ribs QEiy Shctluu 1v helea NeMwb TECHNICAL IrAUCOM SPECIFICATIONS THREE ZONE INTEGRATED PAGE CONTROL MODEL V-2003A FEATURES: LOOP START, GROUND START, OR PAGE PORT ACCESS s THREE ZONES OF ONE WAY PAGE ALL CALL BACKGROUND MUSIC INPUT INTEGRATED SINGLE/WARBLE TONE GENERATORS FEATURES PROGRAMMABLE PER ZONE INTEGRATED POWER SUPPLY PROVIDES EXTERNAL POWER FOR ONE-WAY AMPLIFIED SPEAKERS BATTERY BACK-UP COMPATIBLE PAGE OVERRIDE INPUT FIELD UPGRADABLABLE TO TALKBACK DESCRIPTION: A telephone-compatible three-zone, one-way page control unit with integrated power supply,all call, integrated single/warble tone generators,and background music input. • • POWER REQUIREMENT CONNECTIONS: 1 Amp at 120 VAC Unit equipped with male 50 pin amphenol connector for input/output connections. An RJ11 jack is also INPUTS/OUTPUTS provided for tip and ring input connections. A three Input Impedance: 600 ohms prong polarized Molex connector is provided for Music Source Impedance: 8 to 600 ohms battery back-up connection. Music Input Level: -10 dBm nominal Low Level Output Impedance: 8 ohms ENVIRONMENT Low Level Output Level: -10 dBm nominal Temperature: +32 to+104 T (0 to+40"C) 0 dBm maximum Humidity: 0-85%Non-Condensing DC Output: -24 Vdc at 1 Amp CONTROLS HOUSING AND FINISH Tone Volumes Constructed of grey pained aluminum alloy Background Music Volume DIMENSIONS AND WEIGHT All Call Page Volume 7.13"(18.09 cm)H x 10.0" (25.4 cm)W x 3.0" (7.62 cm)D. Shipping Weight: 5.25 Ibs (2.38 kg) ACCESSORIES Model V-9953 Plug-in Talkback Module Model VPB-260 Battery Back-up Supply 5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800 . . . ARCHITECTS' AND ENGINEERS' SPECIFICATIONS MODEL V-2003A THREE ZONE INTEGRATED PAGE CONTROL The Three-Zone Integrated Page Control,Model V-2003A shall be a wall or shelf mounted,telephone compatible,three- zone,one-way,page control unit with integrated power supply and single/warble tone input. The unit shall be optionally loop start, ground start or contact closure start and shall be capable of recognizing either DTMF tones or rotary pulse for dial selection of three individual zones and all call. The unit shall be programmable on a per zone basis for single tone and interrupted warble tone,background music,and with the installation of the optional plug-in talkback module,handsfree talkback or one-way page operation. System options shall include dial tone and ringback tone. The unit shall provide AGC circuitry for voice page input. The unit shall provide three individual one-way low level outputs,one for each zone. The one-way low level output shall not exceed a maximum of-10 dbm. Individual handsfree talkback output shall also be provided with the installation of the optional plug-in talkback module. All call shall be one-way operation only. Access of specific zones shall not affect features programmed for other zones,i.e.background music shall mute only in the zone being paged while other zones programmed for background music shall not be affected. Audio output signal levels must not exceed 1 watt for talkback. In connection with a telephone system,the unit shall have the ability to provide loop current,the detection of which shall indicate a request for service(in the loop start mode of operation). Ground start operation shall be available as an optional mode of service request. In connection with a telephone system page port,a"dry"tip and ring connection with provision for contact closure activation shall be provided. A battery feed switch located on the unit shall enable or disable the loop current option of the tip and ring connections. A second switch shall select loop start or ground start service request options. In connection with a telephone system supplying "A"lead control from each telephone,the unit shall also have the ability to provide inhibit(speaker cancel)to allow handset to handset"meet me"answer to a page without the paging system broadcasting the conversation. The unit shall have the ability to provide a single tone and an interrupted warble tone over page. The single tone shall be activated by a contact closure and shall follow the contact operation. The interrupted warble tone shall be activated by a contact closure or a 90 Vac ring signal. The single tone shall have priority over the warble tone in the instance of coinciding activation. The unit shall provide the ability to program features on a per zone basis. A dip switch shall be provided for zone feature and system option programming. Dialing codes shall be 1,2,and 3 or 5,6 and 7 for individual zones and 4 or 8 for all call. The detection of the"#"tone shall return dial access. The unit shall be equipped with a 50 pin male amphenol connector for input and output connections and an RJ11 jack for page tip and ring input. Volume controls shall be provided for tones, background music and all call. The unit shall provide a three conductor grounded power cored with NEMA 15-5P type plug for AC input and shall provide auxiliary-24 Vdc and GND outputs. The outputs shall provide a total of 1.0 Amp of-24 Vdc for powering one-way amplified speakers or other accessory devices. The chassis shall be AC grounded. The AC input shall be fuse protected at 1.0 Amp. The unit shall be UL Listed. The unit shall have a power consumption of 1 Amp at 120 Vac. Page input shall have an impedance of 600 Ohms. Music source impedance shall be 8 to 600 ohms. Music input level shall be-10 dBm nominal.Low level output impedance shall be 8 ohms. Low level output level shall be-10 dBm nominal and must not exceed a maximum of 0 dBm. Operating temperature shall be+32 to 104°F(0 to+40°C). Operating humidity level shall be 0%to 85%non-condensing. An optional Plug-in Talkback Module, Model V-9953,shall be available separately. It shall be a plug-in circuit board compatible with the V-2003A to field upgrade it for handsfree talkback capability. It shall provide phone to speaker,speaker to phone,tone,background music and all call page volume controls. System options shall include alert tone and repeated alert tone. Output impedance shall be 45 ohms. Output level shall be 1 watt nominal. Voice switch sensitivity shall be-24 dBm. A separate unit,the Three Zone Integrated Talkback Page Control, Model V-2003AHF,shall be available with the talkback module already installed. The axillary DC outputs of the V-2003A shall provide a total of 500mA of-24 VDC for powering one-way amplified speakers or other accessory devices. The Battery Back-up Supply, Model VPB-260, shall be available separately. It shall provide a polarized molex connector compatible with the molex connector on the V-2003A. In the event of power failure,it shall provide power back-up to the V-2003A and any additional equipment powered by the DC outputs on the V-2003A. The housing of the unit shall be constructed of gray painted aluminum alloy. The maximum dimensions shall be 7.13" (18.09 cm)H x 10.0"(25.4 cm)W x 3.0"(7.62 cm)D. Shipping weight shall be approximately 5.25 Ibs(2.38 kg) 5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800 . . . ` Limited Warranty Valcom, Inc.warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement,repair or refund of any such defective device within the warranty period,provided that: 1. inspection by Valcom, Inc. indicates the validity of the claim, 2. the defect is not the result of damage, misuse,or negligence after the original shipment, 3. the product has not been in any way repaired by others and that factory sealed units are unopened. (A service charge plus parts and labor will be applied to units defaced or physically damaged). 4. freight charges for the return of products to Valcom, Inc.are prepaid, 5. all units"out of warranty"are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to additional charges for parts and labor). This warranty is in lieu of and excludes all other warranties expressed or implied and in no event shall Valcom. Inc. be liable for any anticipated profits consequential damages loss of time or other losses incurred by the buyer in connection with the purchase operation or use of the product This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B.point. 5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800 support@valcom.com TECHNICAL VALCOM SPECIFICATIONS AMPLIFIED CEILING SPEAKER MODEL V-1020C FEATURES: UTILIZES STANDARD CAT 3, 5, OR 6 CABLE EXCELLENT VOICE AND MUSIC REPRODUCTION BUILT-IN ACCESSIBLE VOLUME CONTROL rill'" ADDITIONAL POP-ON, POP-OFF KNOB INCLUDED �:�,�*5•,�,� WIDE SOUND DISPERSION ELECTRICALLY, ACOUSTICALLY MATCHED COMPONENTS STURDY STEEL GRILLE DESCRIPTION: Ceiling flush mount 8"speaker assembly,complete with speaker,amplifier, built-in volume control and round grille. • • SPEAKER ELEMENT ENVIRONMENT Cone Diameter: 8"(20.32 cm) Temperature: -4°to+131 OF (-20 to+55°C) Voice Coil Impedance: 45 Ohms Humidity: 0-95%Non-Condensing INPUT HOUSING AND FINISH Impedance: > 600 Ohms nominal Signal Level -10 dBm line level Steel grille finished in semi-gloss white enamel. The backbox is acoustically treated. The metal backbox and support bridge are finished for rust pre OUTPUT vention and are available separately. Rating: >96 dB @ 4' (1.22 m) DIMENSIONS AND WEIGHT Signal/Noise Ratio: -70 13.0"(33 cm)Dia. x 3" (7.62 cm) D FREQUENCY RESPONSE Weight: 3.75 Ibs (1.7 kg) 80 Hz to 10 kHz MOUNTING ACCESSORIES V-9914M Support Bridge(order in quantities of 5) POWER REQUIREMENTS V-9915M Backbox(order in quantities of 5) 50 mA @ -24 Vdc V-9916M Bridge and Backbox Assembly 5614 HollinsRoad Roanoke, • • 1 • • 1 • 1 1 1 1 . ' : 1 1 info@valcom.com • • ARCHITECTS' AND ENGINEERS' SPECIFICATIONS MODEL V-1020C AMPLIFIED CEILING SPEAKER The ceiling flush mounted 8"(20.32)amplified speaker, Model V-1020C, shall include a speaker,amplifier,volume control and round grille. The speaker assembly,amplifier module,housing and hardware shall be electrically and acoustically matched for a frequency response of 80 Hz to 10 kHz. The assembly shall be FCC part 68 Registered. The registration number shall be BAF917-69358-KX-N. The speaker element shall be cone type with 5 oz(142 g)ceramic magnet. Diameter of speaker cone shall be 8.0" (20.32 cm)with 2.0"(5.08 cm)whizzer cone. Voice coil diameter shall be.75"(1.91 cm). Voice coil impedance shall be 45 ohms. The amplifier shall have a frequency response of 80 Hz to 10 kHz. Distortion shall be less that 1.5%at rated output of 1 watt RMS. Signal to noise ratio shall be-70 dB. The amplifier shall operate on a-24 Vdc nominal, positive ground power supply. Operating current shall be 50 mA at-24 Vdc. Operating temperature shall be-4 to+131 OF(-20 to+55°C). A screwdriver adjustable volume control shall be provided at the center of the grille. The extemally accessible volume control shall make it possible to adjust volume level or speaker without removal of unit. The grille shall be constructed of steel,finished in semi-gloss white enamel. The V-9915M-5 Backbox and V-9914M-5 Support Bridge shall be constructed of steel and finished for rust prevention. The backbox shall be acoustically treated. Both the backbox and support bridge shall be available separately in quantities of five(5)or assembled together singly as the V-9916M The maximum dimensions shall be: Speaker and Grille- 13.0" (33.02 cm)dia x 3.0"(7.62 cm D. Backbox: 12.30" (32.27 cm)dia x 4.02"(10.0 cm)D. Support Bridge: 14.50"(36.83 cm)H x 23.75"(70.33 cm)W x 4.25"(10.80 cm)D. Shipping Weight shall be approximately: Speaker and Grille: 3.75 Ibs(1.7 kg). Support Bridge(qty 5):9.0 Ibs(4.1 kg). Backbox(qty 5): 10.5 Ibs(4.8 kg). Bridge and Backbox Assembly(qty 1): 4.75 Ibs(2.2 kg) Limited Warranty Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of nor- mal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the re- placement, repair or refund of any such defective.device within the warranty period, provided that: 1. inspection by Valcom, Inc. indicates the validity of the claim, 2. the defect is not the result of damage, misuse, or negligence after the original shipment, 3. the product has not been in any way repaired by others and that factory sealed units are unopened. (A service charge plus parts and labor will be applied to units defaced or physically damaged). 4. freight charges for the return of products to Valcom, Inc.are prepaid, 5. all units'but of warranty"are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to additional charges for parts and labor). This warranty is in lieu of and excludes all other warranties expressed or implied and in no event shall Valcom,Inc.be liable for any anticipated profits,consequential damages loss of time or other losses incurred by the buyer in connection with the purchase,operation or use of the product. This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition,the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point. Hollins5614 •. • Roanoke, • 1 • 1 . 1 1 1 1 . • : 1 1 info@valcom.com • • One-Way Talkback Ceiling Speakers Accessories Page 1 of 1 V-9904M-5 ■ Prevents Ceiling Tile Sag PDF D ■ Metal Version Galvanized To Inhibit Rusting ■ For V-1010C 4" Speaker Marke V-9914M-5 ■ Prevents Ceiling Tile Sag Tee ■ Galvanized To Inhibit Rusting Spec ■ Compatible With Round Or Square Baffles For 4" Speakers ■ Fits 8" Flush Mount Ceiling Speakers V-9904M-5 Installal ■ Use With V-9915M Backbox Metal Bridge (5 pack) V-9914-5 ■ Prevents Ceiling Tile Sag V-9i For 8" Speakers ■ Flamex Plastic (V-9914 Model Must Be Used With Backbox Installal V-9914M-5 -V-9915) Metal Bridge (5 pack) ■ Meets UL 94VO Rating V-9c V-9914-5 V-9915M-5 Installai Plastic Bridge(5 pack) ■ Metal Construction With Four Knockouts ■ Use In Plenum Return Ceilings V-9915M-5 ■ Compatible With Round Or Square Baffles Metal Backbox(5 pack) ■ Use With V-9914M-5 Bridge V-9915-5 V-9915-5 Plastic Bridge(5 pack) ■ Plastic Construction With Four Knockouts ■ Use In Plenum Return Ceilings V-9916M ■ Fire Retardant Damping Material Meets UL 94VO Rating Metal Combination ■ Compatible With Round Or Square Baffles V-9916 ■ Use With V-9914-5 Bridge V-9916M Plastic Combination ■ Combination Metal Bridge And Backbox For 8"Ceiling V-9912P-12 V-9916 Speakers Plastic Speaker ■ Combination Fire Retardant Flamex Plastic Bridge And Support Ring Backbox For 8"Ceiling Speakers V-9912P-12 V-9912M-10 ■ Used In Retrofit Gypsum (Sheetrock)Ceilings Metal Speaker ■ Must Be Ordered In Multiples Of 12 Support Ring V-9912M-10 ■ Used In New Construction Gypsum (Sheetrock) Ceilings With 16 Inch Or 24 Inch Support Structure ■ Must Be Ordered In Multiples Of 10 Valcom Power Units 0) http://www.valcom.com/spkrenhance.htm 4/7/2004 TECHNICAL XrAMINNEENEF-MEW, '-MEOW M SPECIFICATIONS SWITCHING POWER SUPPLY VP-2124A FEATURES: 24 VOLT DC "A" BATTERY POWER SUPPLY 2 AMP OUTPUT REGULATED AND FILTERED FLOATING OUTPUT INPUT FUSE PROTECTION OVER-VOLTAGE PROTECTION �L WALL MOUNT PLATE INCLUDED Cf C&L AC CORD INCLUDED DESCRIPTION: Wall or shelf mountable,switching 24 Vdc,filtered"A"talk battery power supply with 2 amp output and output over-voltage protection. • • INPUT ENVIRONMENT Voltage/Frequency 100-240 Vac 50/60 Hz Temperature 32 - 122°F(0-50'C) Power 55 Watts Humidity 10 - 90% Non-condensing BTU/Hr 190 BTU/Hr Protection Internal input fuse MOUNTING Connection IEC 320 Input+AC Cord Wall or Shelf Indicator Power On LED Wall Bracket+Hardware Included OUTPUT DIMENSIONS AND WEIGHT Voltage/Current 24Vdc Regulated±10% 6.00"(15.24 cm)H x 3.50"(8.89 cm)W Filtered,Floating x 2.25"(5.72 cm)D 2 Amps Weight:2.40 Ibs(1.08 kg) Protection Over-voltage Protection Connections Wire Assembly INTERNATIONAL VERSIONS REGULATORY VP-2124-E and VP-2124-UK also available UL,cUL,CE, Meets VDE& FCC Class B Hollins5614 • . • Roanoke, Virginia1 • 40 . 111 1 ' : 11 support@valcom.com • • ARCHITECTS' AND ENGINEERS' SPECIFICATIONS MODEL VP-2124A SWITCHING POWER SUPPLY The 24 Vdc 2 Amp Power Supply, Model VP-2124A,shall be a wall or shelf mount, regulated and filtered,"A"battery type power supply with a 2 Amp output. The unit shall be solid state and provide over voltage protection. The unit shall provide a three conductor grounded power cord with IEC-320 AC input plug and shall include an AC input cord. Output connections shall be a 2 wire pigtail. The input shall be fuse protected. The unit shall be UL and cUL listed and shall meet FCC Class B specifications. Alternate power supplies(VP-2124A-EC and VP-2124A-UK)suitable for use in some international markets, shall also be available,and shall be CE approved and meets VIDE regulations. The power supply shall provide a floating 24 Vdc output. The chassis shall be AC grounded and a LOC GND terminal, connected to AC GND,shall be provided for output reference. Output voltage shall be-24 Vdc+10%. Output current shall be 2 Amp. Maximum ripple at rated output shall be 10 mV RMS. Input voltage shall be 100-240 Vac,50/60 Hz,55 watts maximum.The unit shall include an internal input fuse. Operating temperature shall be+32 to 122°F(0 to 50°C). Operating humidity shall be 10 to 90%non-condensing. The power supply shall be housed in a black,high impact ABS plastic case. The case shall be sealed. Maximum dimensions shall be 6.00"(15.24 cm)H x 3.50"(8.89 cm)W x 2.25"(5.72 cm)D. Shipping Weight shall be 2.40 lbs(1.08 kg). Limited Warranty Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1. inspection by Valcom, Inc. indicates the validity of the claim, 2. the defect is not the result of damage, misuse, or negligence after the original shipment, 3. the product has not been in any way repaired by others and that factory sealed units are unopened. (A service charge plus parts and labor will be applied to units defaced or physically damaged). 4. freight charges for the return of products to Valcom, Inc.are prepaid, 5. all units"out of warranty"are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to additional charges for parts and labor). This warranty is in lieu of and excludes all other warranties expressed or implied and in no event shall Valcom.Inc.be liable for any anticipated profits,consequential damages.loss of time or other losses incurred by the buyer in connection with the purchase,operation or use of the product. This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B.point. 5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800 support@valcom.com • • TECHNICAL SPECIFICATIONS 5-WATT AMPLIFIED HORNS MODEL V-1030C, V-1030M FEATURES: INDOORIOUTDOOR USE BUILT-IN 5 WATT AMPLIFIER MODULE . HIGH IMPACT ABS HOUSING ;, { BUILT-IN VOLUME CONTROL � K OMNI-DIRECTIONAL MOUNTING BASE WALL OR ELECTRICAL BOX MOUNT " OPERATES ON -24 VDC POWER SUPPLY I-BEAM CLAMP INCLUDED DESCRIPTION: The V-1030C and V-1030M are weather resistant, reentrant,5 watt amplified horn speaker, complete with 5 watt amplifier,volume control, horn housing, mounting base and I-beam clamp. SOUND PRESSURE LEVELS HOUSING AND FINISH 116 dB measured at 4'(1.22 m)on axis with The horn is made of high impact ABS plastic. a-10dl3m input at 1 kHz The mounting base is constructed of ultra high FREQUENCY RESPONSE impact LEXAN®plastic. 275 Hz to 14 kHz DIMENSIONS AND WEIGHT DISPERSION 7.38"(18.75 cm)H x 10.0"(25.4 cm)W x 10.50" 1200 Horizontal and 900 Vertical (26.67 Weight 4)b Ibs(2.2 kg.) AMPLIFIER MODULE Rated Output: 5 Watts RMS ENVIRONMENT Output Load: 8 Ohms Temperature: -20 to+55°C(4 to+131 OF) Input Impedance: 600 Ohms(1 kHz at rated output) Humidity:-0-95%Non-Condensing Power Supply: -24 Vdc nominal, positive ground Operating Current: 300 mA at-24 Vdc MOUNTING Omni-Directional mounting fully adjustable, 3600 horizontal and 160'vertical. Detachable base for wall or electrical box mounting with I-beam clamp included. 5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800 . . . • ARCHITECTS' AND ENGINEERS' SPECIFICATIONS MODEL V-1030C, V-1030M 5 WATT AMPLIFIED HORN The 5-Watt Amplified Horn, Model V-1030C,shall be an FCC registered,weather-resistant,high efficiency reentrant type horn with high frequency diffuser. It shall be equipped with an amplifier, externally accessible volume control. It shall include a detachable base for wall or single,double or octagon electrical box mounting and omni-directional ball joint mounting bracket to allow precise positioning in the vertical and horizontal planes with a single adjustment. An I-beam mounting clamp shall also be provided. The FCC registration number shall be BAFUSA-69358-KX-N. The frequency response shall by 275 Hz to 14 kHz. Dispersion shall be 120 horizontal and 90° vertical. Sound pressure level shall be 116 dB measured at 4 feet(1.22 m)on axis with an input to the amplifier module being-10 dBm at 1 kHz. Distortion shall be less than 2.05 at rated output of 5 watts RMS. Output load shall be 8 ohms. Input impedance shall be 600 ohms nominal. The amplifier shall operate on a-24 Vdc nominal,positive ground power supply. Operating current shall be 300 mA at-24 Vdc. Operating temperature shall be 4 to 131 °F(-20 to 55°C). Operating humidity shall be 0-95%noncondensing. The horn shall be constructed of high impact ABS plastic. The mounting base shall be constructed of LEXANO an ultra high impact material which is stronger and tougher than die casting. The finish shall be beige with brown accent. The I-beam mounting clamp shall be constructed of zinc chromate plated steel. Dimensions of the horn shall be 7.38"(18.75 cm)H x 10.0"(25.40 cm)W x 10.5"(26.67 cm)D. Shipping weight shall be approximately 4.75 Ibs(2.2 kg). LEXAN®Registered Trademark of General Electric Co. Limited Warranty Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of nor- mal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the re- placement, repair or refund of any such defective device within the warranty period,provided that: 1. inspection by Valcom, Inc. indicates the validity of the claim, 2. the defect is not the result of damage, misuse, or negligence after the original shipment, 3. the product has not been in any way repaired by others and that factory sealed units are unopened. (A service charge plus parts and labor will be applied to units defaced or physically damaged). 4. freight charges for the return of products to Valcom, Inc. are prepaid, 5. all units"out of warranty"are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to additional charges for parts and labor). This warranty is in lieu of and excludes all other warranties expressed or implied and in no event shall Valcom. Inc.be liable for any anticipated profits, consequential damages,loss of time or other losses incurred by the buyer in connection with the purchase,operation or use of the product. This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition,the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point. 5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800 support@valcom.com • • Speaker Volume Control Page 1 of 1 ■ Control Volume Of Up To 150 One-Way Speakers ■ Stainless Steel Hardware (Includes Mounting Box) PDF Dc i1Ml�lur+— Shipping Weight: 1lbs (.45 kg) Installati Dimensions: 4.5" H x 2.75"W x 2.8" D r= (11.43 cm x 6.98 cm x 7.11 cm) a � V-1092 Speaker Volume Control Valcom Power Units I* http://www.valcom.com/v-1092.htm 4/7/2004 Door Entry Security Systems Page 1 of 1 ■ Door Unlock Contact Closure(Strikeplate Required) � ! ■ Transmit And Receive Volume Controls PDF Di ■ Alarm Functions ■ Background Music Input With Volume Control Marketi ■ Built-In Ring Generator With On/Off Switch ■ 3 Distinctive Ring Patterns V * ■ Programmable Options Include: 9 P - Door Unlock Codes Installati -#Of Ring Cycles Before Door Request Is Terminated Single Door -Time The Door Remains V-2901A Unlocked (Per Door) Enhan Door Answering ■ Places Simultaneous Calls In Queue (V-2904) Doorplai Device -Activate ■ Requires-24 Vdc, 600mA(Filtered) 10 Vac Lamp Speaker Door Locks Surface Access: Electronic or 1A2 Line Key (line card required, PBX Loop V-1074 Valcom Power Units Start Trunk Port, or Dedicated Single Line Phone Set r0 Specifications: Input Impedance: 600 ohm; Output: 45 ohm; Flush M Power Requirements: -24 Vdc, 600 mA Vandal- V-1073 Shipping Weight: 4.8 Ibs (2.18 kg) Flush M Dimensions: 8.6"H x 11.0"W x 2.3"D (21.84cm x 27.94 cm x 5.84 V-1072� cm) http://www.valcom.com/v2901 a.htm 4/7/2004 Door Entry Speakers Page 1 of 1 i d. ■ Weather-Resistant Talkback Speaker ■ Includes Call Button ("CALL" in Braille) PDF Dc ■ Mounts In Standard Double Gang Electric Box ■ Stainless Steel or Brass Faceplate Marketi Shipping Weight:: Stainless Steel Tec Dimensions: 4.5"H x 4.5"W x 1.3"D (11.43cm x 11.43 cm x 3.3 cm) Spec LED Versions Installati Flush Mount V-1072B-ST - V-1072A-ST V-1072B-BRASS V-1072A-BRASS Doorplate Speakers Valc�om Power Units http://www.valcom.com/v1072a.htm 4/7/2004 Linear Power Supplies Page 1 of 1 • Receptacle mount, 24 Vdc 600 mA, filtered "A"Talk Battery power supply. PDF Ds ■ UL Marketi Specifications: DC Output: -24 Vdc, 600mA; Installati Power Requirements: 120 Vac, 60 Hz, 36 W Shipping Weight: 2.0 Ibs (.91 kg) Dimensions: 5.5" H x 3.30"W x 3.25" D Receptacle Mount (13.97 cm x 8.38 cm x 8.25 cm) VP-624B Linear Power Supply .6 Amp Valcom Power Units -FFI-21 http://www.valcom.com/vp624.htm 4/7/2004